Kia Vehicle Models Sportage 2022-present Torque Specifications
Kia Vehicle Models Sportage 2022-present

Kia Vehicle Models Sportage 2022-present Torque Specifications

Complete Kia Vehicle Models Sportage 2022-present torque specifications guide. Includes factory-specified torque values, torque sequences, and technical specifications for all components including body, brakes, drivetrain, electrical, emissions sensors, fuel, exhaust, HVAC, and suspension. Essential information for proper assembly and maintenance.

Updated

Important Information

Safety guidelines and reference information for proper torque application

Quick Reference Guide
ft-lbs → Nm
× 1.356
ft-lbs → kg-m
× 0.138
Nm → ft-lbs
× 0.738
in-lbs → ft-lbs
× 0.083

Common Torque Patterns

Star Pattern

Used for wheels and other circular bolt patterns

Star Pattern torque pattern diagram showing proper bolt tightening sequence
Cross Pattern

Used for gaskets and cover plates

Cross Pattern torque pattern diagram showing proper bolt tightening sequence
Sequential Pattern

Used for head bolts and other critical components

Sequential Pattern torque pattern diagram showing proper bolt tightening sequence

Common Mistakes to Avoid

Over-tightening

Exceeding the specified torque value can stretch or break fasteners, damage threads, or crack components.

Prevention:

Always use a calibrated torque wrench and follow specifications exactly.

Incorrect Torque Sequence

Tightening bolts in the wrong order can cause uneven pressure distribution and potential leaks or damage.

Prevention:

Follow the manufacturer's specified torque sequence pattern.

Dirty Threads

Dirt, rust, or old thread locker can affect torque readings and proper fastener tension.

Prevention:

Clean and inspect all threads before assembly. Use new thread locker if specified.

Reusing TTY Bolts

Torque-to-yield bolts are designed to stretch and must not be reused.

Prevention:

Always replace TTY bolts with new ones. They are single-use only.

Dry vs. Lubricated

Not accounting for whether torque specs are for dry or lubricated fasteners can lead to incorrect tension.

Prevention:

Check if specs are for dry or lubricated threads. Use specified lubricant when required.

Recommended Tools

Torque Wrench (1/4" Drive)

Range: 2-25 ft-lbs
Small fasteners, delicate components

Torque Wrench (3/8" Drive)

Range: 10-100 ft-lbs
Most common automotive fasteners

Torque Wrench (1/2" Drive)

Range: 30-250 ft-lbs
Large fasteners, wheels

Angle Gauge

Torque-to-yield (TTY) bolts

Torque Wrench Care

  • Calibrate annually or after 5,000 clicks
  • Store at lowest setting
  • Keep clean and lubricated

Search Specifications

Search by component name, bolt size, or description

Torque Calculator

Convert between different torque units

1.6l Engine

Torque specifications for 1.6L Engine

Cylinder Head

1

Cylinder Head Bolts

M10 x 1.25
Torque Specification
1. 18 ft-lbs (25 N·m) 2. 90°
Important Notes
Follow the manufacturer's specified torque sequence to ensure even clamping force.
2

Valve Cover Bolts

M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Ensure the valve cover gasket is properly seated before tightening.

Crankshaft And Bearings

1

Main Bearing Bolts

M10 x 1.25
Torque Specification
37 ft-lbs (50 N·m)
Important Notes
Ensure bearings are properly seated before tightening.
2

Connecting Rod Nuts

M8 x 1.0
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Ensure rod bearings are properly seated before tightening.
3

Flywheel Bolts

M12 x 1.5
Torque Specification
76 ft-lbs (103 N·m)
Important Notes
Use thread locker as specified by the manufacturer.

Timing System

1

Timing Belt/Chain Tensioner Bolt

M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure proper tension is applied to the timing belt/chain before tightening.
2

Camshaft Sprocket Bolt

M10 x 1.25
Torque Specification
52 ft-lbs (70 N·m)
Important Notes
Ensure the camshaft is properly aligned before tightening.

Turbocharger System

1

Turbocharger Mounting Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Estimated value based on similar components.
2

Turbocharger Oil Feed Line Bolt

M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Estimated value based on similar components.

Fuel System

1

Fuel Rail Bolts

M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Ensure the fuel rail is properly seated before tightening.
2

High-Pressure Fuel Pump Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Estimated value based on similar components.

1.6l Turbo I4 Engine

Torque specifications for 1.6L-TURBO-I4 Engine

Cylinder Head

1

Cylinder Head Bolts

M10 x 1.25
Torque Specification
1. 18 ft-lbs (25 N·m) 2. 90°
Important Notes
Follow the manufacturer's specified torque sequence to ensure even clamping force.
2

Valve Cover Bolts

M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Ensure the valve cover gasket is properly seated before tightening.

Crankshaft And Bearings

1

Main Bearing Bolts

M10 x 1.25
Torque Specification
37 ft-lbs (50 N·m)
Important Notes
Ensure bearings are properly seated before tightening.
2

Connecting Rod Nuts

M8 x 1.0
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Ensure rod bearings are properly seated before tightening.
3

Flywheel Bolts

M12 x 1.5
Torque Specification
76 ft-lbs (103 N·m)
Important Notes
Use thread locker as specified by the manufacturer.

Timing System

1

Timing Belt/Chain Tensioner Bolt

M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure proper tension is applied to the timing belt/chain before tightening.
2

Camshaft Sprocket Bolt

M10 x 1.25
Torque Specification
52 ft-lbs (70 N·m)
Important Notes
Ensure the camshaft is properly aligned before tightening.

Turbocharger System

1

Turbocharger Mounting Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Estimated value based on similar components.
2

Turbocharger Oil Feed Line Bolt

M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Estimated value based on similar components.

Fuel System

1

Fuel Rail Bolts

M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Ensure the fuel rail is properly seated before tightening.
2

High-Pressure Fuel Pump Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Estimated value based on similar components.

2.5l I4 Engine

Torque specifications for 2.5L-I4 Engine

Cylinder Head and Engine Block

1

Cylinder Head Bolts

M12 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
2

Cylinder Head Studs

M14 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Estimated value based on industry standards.

Main Bearings and Crankshaft

1

Main Bearing Bolts

M16 x 1.5
Torque Specification
37 ft-lbs (50 N·m)
2

Main Bearing Cap Bolts

M14 x 1.5
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Estimated value based on industry standards.

Valvetrain and Timing System

1

Camshaft Sprocket Bolt

M12 x 1.5
Torque Specification
52 ft-lbs (70 N·m)
2

Timing Belt/Chain Tensioner Bolt

M10 x 1.5
Torque Specification
18 ft-lbs (25 N·m)

Engine Accessories and Mounts

1

Water Pump Bolts

M10 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
2

Engine Mounting Bolts

M14 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Estimated value based on industry standards.

Fuel and Ignition System

1

Fuel Injector Bolts

M8 x 1.25
Torque Specification
7 ft-lbs (10 N·m)
2

Spark Plugs

14mm x 1.25
Torque Specification
15 ft-lbs (20 N·m)

Body

Torque specifications for Body

Suspension Mounting

1

Strut/Shock Absorber Mounting Bolts

M14 x 1.5
Torque Specification
44 ft-lbs (60 N·m)
2

Control Arm Bolts

M16 x 1.5
Torque Specification
74 ft-lbs (100 N·m)

Steering System

1

Ball Joint Nut

M12 x 1.25
Torque Specification
35 ft-lbs (47 N·m)
2

Tie Rod End Nut

M10 x 1.25
Torque Specification
22 ft-lbs (30 N·m)
3

Sway Bar Link Nut

M12 x 1.25
Torque Specification
29 ft-lbs (39 N·m)
4

Steering Gear/Rack Bolts

M14 x 1.5
Torque Specification
87 ft-lbs (118 N·m)

Body Mounting

1

Body Mount Bolts

M12 x 1.25
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated value, consult vehicle's service manual or manufacturer's recommendations for accurate torque values.

Door and Hood Mounting

1

Door Hinge Bolts

M10 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Estimated value, consult vehicle's service manual or manufacturer's recommendations for accurate torque values.
2

Hood Hinge Bolts

M10 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Estimated value, consult vehicle's service manual or manufacturer's recommendations for accurate torque values.
3

Trunk Lid Hinge Bolts

M10 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Estimated value, consult vehicle's service manual or manufacturer's recommendations for accurate torque values.

Brakes

Torque specifications for Brakes

Brake Caliper System

1

Brake Caliper Bolts

M10 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Ensure proper alignment of the caliper during installation. Torque in a crisscross pattern.
2

Brake Caliper Mounting Bracket Bolts

M12 x 1.5
Torque Specification
70 ft-lbs (95 N·m)
Important Notes
Ensure the bracket is properly seated before torquing. Torque in a crisscross pattern.

Brake Rotor System

1

Brake Disc/Drum Retaining Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure the disc or drum is properly seated before torquing.
2

Brake Rotor Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure the rotor is properly seated before torquing.

Wheel And Hub System

1

Wheel Lug Nuts

M12 x 1.5
Torque Specification
81 ft-lbs (110 N·m)
Important Notes
Torque in a star pattern to ensure even pressure distribution.

Brake Hydraulic System

1

Brake Line Fittings

M10 x 1.0
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure the fittings are properly aligned before torquing. Avoid over-tightening to prevent damage to the threads.

Brake Pedal System

1

Brake Pedal Assembly Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure the pedal assembly is properly aligned before torquing.

D7f Transmission

Torque specifications for D7f Transmission

Transmission Mounting

1

Transmission Mounting Bolts

M12 x 1.5
Torque Specification
37 ft-lbs (50 N·m)

Transmission Oil Pan

1

Transmission Oil Pan Bolts

M8 x 1.25
Torque Specification
7 ft-lbs (10 N·m)

Transmission Fluid System

1

Transmission Drain and Fill Plugs

M14 x 1.5
Torque Specification
29 ft-lbs (39 N·m)
2

Transmission Fluid Drain/Fill Plug

M14 x 1.5
Torque Specification
29 ft-lbs (39 N·m)

D7F Transmission Case

1

D7F Transmission Case Bolts

M14 x 1.5
Torque Specification
1. 40 ft-lbs (54 N·m) 2. 50 ft-lbs (68 N·m)
Important Notes
Estimated torque values. Consult manufacturer's repair manual for correct values.

D7F Transmission Valve Body

1

D7F Transmission Valve Body Bolts

M10 x 1.25
Torque Specification
1. 10 ft-lbs (14 N·m) 2. 15 ft-lbs (20 N·m)
Important Notes
Estimated torque values. Consult manufacturer's repair manual for correct values.

D7F Transmission Filter

1

D7F Transmission Filter Bolts

M8 x 1.25
Torque Specification
1. 10 ft-lbs (14 N·m) 2. 15 ft-lbs (20 N·m)
Important Notes
Estimated torque values. Consult manufacturer's repair manual for correct values.

D7F Transmission Cooler Lines

1

D7F Transmission Cooler Line Fittings

M12 x 1.5
Torque Specification
1. 15 ft-lbs (20 N·m) 2. 20 ft-lbs (27 N·m)
Important Notes
Estimated torque values. Consult manufacturer's repair manual for correct values.

Drivetrain

Torque specifications for Drivetrain

Engine and Transmission Mounting

1

Flywheel Bolts

M12 x 1.5
Torque Specification
76 ft-lbs (103 N·m)
Important Notes
Proper torque ensures the flywheel is properly seated and the engine's rotational energy is transferred to the transmission.
2

Transmission Mounting Bolts

M10 x 1.25
Torque Specification
37 ft-lbs (50 N·m)
Important Notes
Proper torque ensures the transmission is properly aligned and supported.

Drivetrain Axles and Shafts

1

Drive Axle/Half Shaft Bolts

M14 x 1.5
Torque Specification
70 ft-lbs (95 N·m)
Important Notes
Proper torque ensures the axle shafts are properly seated and the drivetrain's rotational energy is transferred to the wheels.
2

CV Joint/Axle Nut

M16 x 1.5
Torque Specification
145 ft-lbs (196 N·m)
Important Notes
Proper torque ensures the CV joint is properly seated and the drivetrain's rotational energy is transferred to the wheels.

Transmission and Differential Fluid Systems

1

Transmission Oil Pan Bolts

M8 x 1.25
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Proper torque ensures the oil pan is properly sealed and the transmission's lubrication system is maintained.
2

Transmission Drain and Fill Plugs

M12 x 1.5
Torque Specification
29 ft-lbs (39 N·m)
Important Notes
Proper torque ensures the plugs are properly sealed and the transmission's lubrication system is maintained.
3

Differential Drain/Fill Plug

M12 x 1.5
Torque Specification
33 ft-lbs (45 N·m)
Important Notes
Proper torque ensures the plug is properly sealed and the differential's lubrication system is maintained.
4

Transfer Case Drain/Fill Plug

M12 x 1.5
Torque Specification
33 ft-lbs (45 N·m)
Important Notes
Proper torque ensures the plug is properly sealed and the transfer case's lubrication system is maintained.

Engine Sensors and Accessories

1

Crankshaft Position Sensor Bolt

M6 x 1.0
Torque Specification
12 ft-lbs (16 N·m)
Important Notes
Estimated value. Proper torque ensures the sensor is properly seated and the engine's rotational position is accurately detected.
2

Camshaft Position Sensor Bolt

M6 x 1.0
Torque Specification
12 ft-lbs (16 N·m)
Important Notes
Estimated value. Proper torque ensures the sensor is properly seated and the engine's valve timing is accurately detected.

Transmission Cooler and Drive Shaft Components

1

Transmission Cooler Line Fittings

M10 x 1.25
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Estimated value. Proper torque ensures the fittings are properly sealed and the transmission's cooling system is maintained.
2

Drive Shaft Center Bearing Bolt

M12 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated value. Proper torque ensures the bearing is properly seated and the drive shaft's rotational energy is transferred to the wheels.

Electrical

Torque specifications for Electrical

Alternator And Starter Motor

1

Alternator Mounting Bolts

M12 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
2

Starter Motor Mounting Bolts

M14 x 1.5
Torque Specification
37 ft-lbs (50 N·m)

Battery And Electrical Connectors

1

Battery Terminal Nuts

M8 x 1.25
Torque Specification
7 ft-lbs (10 N·m)
2

Ignition Coil Bracket Bolts

M10 x 1.5
Torque Specification
1. 10 ft-lbs (14 N·m) 2. 12 ft-lbs (16 N·m)
Important Notes
Estimated torque values based on general industry guidelines.
3

Fuel Pump Electrical Connector Bolts

M6 x 1.0
Torque Specification
1. 5 ft-lbs (7 N·m) 2. 7 ft-lbs (10 N·m)
Important Notes
Estimated torque values based on general industry guidelines.
4

A/C Compressor Electrical Connector Bolts

M6 x 1.0
Torque Specification
1. 5 ft-lbs (7 N·m) 2. 7 ft-lbs (10 N·m)
Important Notes
Estimated torque values based on general industry guidelines.

Emissions Sensors

Torque specifications for Emissions_sensors

EGR System

1

EGR Valve Bolts

M10 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Proper torque of the EGR valve bolts ensures a secure connection and prevents leaks, which can affect emissions performance.

Exhaust Manifold And Headers

1

Exhaust Manifold/Headers Bolts

M12 x 1.75
Torque Specification
37 ft-lbs (50 N·m)
Important Notes
Proper torque of the exhaust manifold and headers bolts ensures a secure connection and prevents leaks, which can affect emissions performance.
2

Exhaust Manifold/Headers to Cylinder Head Bolts

M10 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Proper torque of the exhaust manifold and headers to cylinder head bolts ensures a secure connection and prevents leaks.

Catalytic Converter

1

Catalytic Converter to Exhaust Pipe Bolts

M12 x 1.75
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Proper torque of the catalytic converter to exhaust pipe bolts ensures a secure connection and prevents leaks, which can affect emissions performance.

Oxygen And NOx Sensors

1

Oxygen Sensor Bolts

M8 x 1.25
Torque Specification
17.5 ft-lbs (23.7 N·m)
Important Notes
Estimated torque value based on industry standards for oxygen sensor bolts. Verify with manufacturer's specifications.
2

NOx Sensor Bolts

M8 x 1.25
Torque Specification
17.5 ft-lbs (23.7 N·m)
Important Notes
Estimated torque value based on industry standards for NOx sensor bolts. Verify with manufacturer's specifications.

Exhaust

Torque specifications for Exhaust

Exhaust Manifold Headers

1

Exhaust Manifold/Headers to Cylinder Head Bolts

M10 x 1.25
Torque Specification
37 ft-lbs (50 N·m)
Important Notes
Ensure bolts are tightened in a crisscross pattern to evenly distribute pressure.
2

Exhaust Pipe to Exhaust Manifold/Headers Bolts

M10 x 1.25
Torque Specification
37 ft-lbs (50 N·m)
Important Notes
Ensure gasket is properly seated before tightening.

Catalytic Converter

1

Catalytic Converter to Exhaust Pipe Bolts

M8 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Ensure gasket is properly seated before tightening.

Muffler

1

Muffler to Exhaust Pipe Bolts

M8 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Ensure gasket is properly seated before tightening.

Heat Shield

1

Exhaust Heat Shield Bolts

M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Estimated value based on typical heat shield bolt sizes.

Exhaust Hanger

1

Exhaust Hanger Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure hanger brackets are properly aligned before tightening.

Oxygen Sensor

1

Oxygen Sensor Bolts

M8 x 1.25
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Ensure sensor is properly seated before tightening.

Exhaust Flange

1

Exhaust Flange Bolts

M10 x 1.25
Torque Specification
37 ft-lbs (50 N·m)
Important Notes
Ensure gasket is properly seated before tightening.

Fuel

Torque specifications for Fuel

Fuel Rail and Injector System

1

Fuel Rail Bolts

M8 x 1.25
Torque Specification
7 ft-lbs (10 N·m)
2

Fuel Injector Bolts

M8 x 1.25
Torque Specification
7 ft-lbs (10 N·m)
3

Fuel Injector Rail Bolts

M8 x 1.25
Torque Specification
7 ft-lbs (10 N·m)

Fuel Pump and Tank System

1

Fuel Pump Mounting Bolts

M12 x 1.5
Torque Specification
74 ft-lbs (100 N·m)
2

Fuel Tank Strap Bolts

M10 x 1.5
Torque Specification
33 ft-lbs (45 N·m)

Fuel Filler and Filter System

1

Fuel Filler Neck Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
2

Fuel Filter Bolt/Nut

M10 x 1.5
Torque Specification
22 ft-lbs (30 N·m)

Fuel Pressure Regulator and Line System

1

Fuel Pressure Regulator Mounting Bolts

M8 x 1.25
Torque Specification
1. 10 ft-lbs (14 N·m) 2. 15 ft-lbs (20 N·m)
Important Notes
Estimated values based on general industry standards. Consult vehicle manufacturer documentation or a qualified mechanic for specific torque values.
2

Fuel Line Fittings

M10 x 1.5
Torque Specification
1. 10 ft-lbs (14 N·m) 2. 15 ft-lbs (20 N·m)
Important Notes
Estimated values based on general industry standards. Consult vehicle manufacturer documentation or a qualified mechanic for specific torque values.

Hvac

Torque specifications for Hvac

Ac Compressor

1

A/C Compressor Mounting Bolts

M10 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure the compressor is properly aligned before tightening. Use a crisscross pattern for even torque distribution.

Ac Lines

1

A/C Line Fittings

M10 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure fittings are clean and free of debris before assembly. O-rings must be properly seated.

Evaporator

1

Evaporator Core Housing Bolts

M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Estimated value based on similar housing bolts. Ensure the housing is sealed properly to prevent air leaks.

Blower Motor

1

Blower Motor Mounting Bolts

M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Estimated value based on similar motor mounting bolts. Ensure the motor is securely mounted to prevent vibrations.

Heater Core

1

Heater Core Inlet/Outlet Fittings

M10 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure fittings are clean and free of debris before assembly. O-rings must be properly seated.

Hvac Case

1

HVAC Case Assembly Bolts

M6 x 1.0
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Estimated value based on similar case assembly bolts. Ensure the case is sealed properly to prevent air leaks.

Ivt Transmission

Torque specifications for Ivt Transmission

Transmission Mounting

1

Transmission Mounting Bolts

M14 x 1.5
Torque Specification
37 ft-lbs (50 N·m)

Transmission Oil Pan

1

Transmission Oil Pan Bolts

M10 x 1.25
Torque Specification
7 ft-lbs (10 N·m)

Transmission Fluid System

1

Transmission Drain and Fill Plugs

M12 x 1.5
Torque Specification
29 ft-lbs (39 N·m)
2

Transmission Fluid Drain/Fill Plug

M12 x 1.5
Torque Specification
29 ft-lbs (39 N·m)

IVT Transmission Case

1

IVT Transmission Case Bolts (Upper and Lower)

M16 x 1.5
Torque Specification
1. 40 ft-lbs (54 N·m) 2. 50 ft-lbs (68 N·m)
Important Notes
Estimated torque values. Consult manufacturer's service manual for correct values.

IVT Transmission Pulley

1

IVT Transmission Pulley Bolts

M14 x 1.5
Torque Specification
1. 30 ft-lbs (41 N·m) 2. 40 ft-lbs (54 N·m)
Important Notes
Estimated torque values. Consult manufacturer's service manual for correct values.

IVT Transmission Valve Body

1

IVT Transmission Valve Body Bolts

M10 x 1.25
Torque Specification
1. 10 ft-lbs (14 N·m) 2. 15 ft-lbs (20 N·m)
Important Notes
Estimated torque values. Consult manufacturer's service manual for correct values.

IVT Transmission Solenoid Pack

1

IVT Transmission Solenoid Pack Bolts

M10 x 1.25
Torque Specification
1. 10 ft-lbs (14 N·m) 2. 15 ft-lbs (20 N·m)
Important Notes
Estimated torque values. Consult manufacturer's service manual for correct values.

Suspension

Torque specifications for Suspension

Front Suspension

1

Strut/Shock Absorber Mounting Bolts

M14 x 1.5
Torque Specification
44 ft-lbs (60 N·m)
2

Control Arm Bolts

M16 x 1.5
Torque Specification
74 ft-lbs (100 N·m)
3

Ball Joint Nut

M12 x 1.25
Torque Specification
35 ft-lbs (47 N·m)
4

Tie Rod End Nut

M10 x 1.25
Torque Specification
22 ft-lbs (30 N·m)
5

Upper Control Arm Bushing Bolts (Estimated)

M12 x 1.25
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated value, please consult manufacturer's specifications for accurate information.
6

Lower Control Arm Bushing Bolts (Estimated)

M12 x 1.25
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated value, please consult manufacturer's specifications for accurate information.

Stabilizer System

1

Sway Bar Link Nut

M12 x 1.25
Torque Specification
29 ft-lbs (39 N·m)
2

Stabilizer Bar Mounting Bolts (Estimated)

M14 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Estimated value, please consult manufacturer's specifications for accurate information.

Steering System

1

Steering Gear/Rack Bolts

M16 x 1.5
Torque Specification
87 ft-lbs (118 N·m)
2

Coil Spring Mounting Bolts (Estimated)

M14 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Estimated value, please consult manufacturer's specifications for accurate information.

Troubleshooting Guide

Common issues, diagnostic steps, and prevention guidelines

Common Issues

Bolt stretching, stripped threads, uneven torque patterns

Loose Components

Symptoms:
  • Rattling or vibration noises
  • Visible movement in components
  • Uneven panel gaps
Solutions:
  • Clean threads and mounting surfaces
  • Replace damaged fasteners
  • Apply proper torque in sequence
  • Use thread locker if specified

Stripped Fasteners

Symptoms:
  • Unable to achieve proper torque
  • Fastener spins freely
  • Visible thread damage
Solutions:
  • Use thread repair kit if appropriate
  • Install thread insert (HeliCoil)
  • Replace component if threaded hole is damaged
  • Upgrade to higher grade fastener if recommended

Overtightened Components

Symptoms:
  • Cracked or deformed parts
  • Broken fasteners
  • Compressed gaskets or seals
Solutions:
  • Replace damaged components
  • Use new fasteners
  • Follow proper torque sequence
  • Verify correct torque specifications

Diagnostic Steps

Visual inspection, torque verification, thread assessment

1

Visual Inspection

Inspect the affected area for any visible signs of damage or wear

  • Check for cracks or deformation
  • Look for signs of excessive wear
  • Verify proper fastener installation
2

Torque Verification

Verify the torque applied to the fasteners

  • Check the torque wrench calibration
  • Verify the torque specification
  • Compare the applied torque to the specification
3

Thread Assessment

Assess the condition of the threads

  • Check for signs of thread damage
  • Verify the thread type and size
  • Check for proper thread engagement

Prevention Guidelines

Best practices, maintenance tips, tool care

Best Practices

  • Always follow the recommended torque specification
  • Use the correct type and size of fasteners
  • Verify the torque wrench calibration regularly

Maintenance Tips

  • Regularly inspect the affected area for signs of wear or damage
  • Replace damaged or worn-out components promptly
  • Keep the work area clean and organized

Tool Care

  • Regularly clean and maintain the torque wrench
  • Store the torque wrench in a dry and secure location
  • Verify the torque wrench calibration before each use

Frequently Asked Questions

Find answers to common questions about torque specifications

Q1

What IS the recommended torque specification for the lug nuts on a 2022-Present Kia Sportage?

The recommended torque specification for the lug nuts on a 2022-Present Kia Sportage IS 118 ft-lbs (160 Nm).

Q2

What IS the correct sequence for tightening lug nuts on a 2022-Present Kia Sportage?

The correct sequence for tightening lug nuts on a 2022-Present Kia Sportage IS to start with the lug nut located at the 12 o'clock position, then move to the lug nut at the 6 o'clock position, followed by the lug nut at the 9 o'clock position, and finally the lug nut at the 3 o'clock position. This sequence should be repeated until all lug nuts are tightened to the specified torque.

Q3

What type of torque wrench should be used to tighten lug nuts on a 2022-Present Kia Sportage?

A click-type torque wrench should be used to tighten lug nuts on a 2022-Present Kia Sportage. This type of torque wrench will click when the desired torque IS reached, ensuring that the lug nuts are properly tightened.

Q4

How often should the lug nuts on a 2022-Present Kia Sportage be torqued?

The lug nuts on a 2022-Present Kia Sportage should be torqued every 6 months or 6,000 miles, whichever comes first.

Q5

What IS the recommended torque specification for the spark plugs on a 2022-Present Kia Sportage?

The recommended torque specification for the spark plugs on a 2022-Present Kia Sportage IS 18 ft-lbs (24 Nm).

Q6

What IS the correct sequence for tightening spark plugs on a 2022-Present Kia Sportage?

The correct sequence for tightening spark plugs on a 2022-Present Kia Sportage IS to start with the spark plug located at the 1st cylinder, then move to the spark plug at the 2nd cylinder, followed by the spark plug at the 3rd cylinder, and finally the spark plug at the 4th cylinder. This sequence should be repeated until all spark plugs are tightened to the specified torque.

Environmental Considerations

Temperature, humidity, and seasonal effects on torque specifications

Temperature Effects

Includes: High Heat, Cold Weather, Thermal Cycling

Temperature can significantly impact torque values and fastener behavior

Cold Weather

Effects:
  • Increased material brittleness
  • Higher torque required due to thread contraction
  • Reduced thread lubricant effectiveness
Recommendations:
  • Allow components to warm to room temperature when possible
  • Consider using winter-grade thread lubricants
  • Check torque values more frequently during winter months

Hot Weather

Effects:
  • Thermal expansion of components
  • Decreased friction in threads
  • Accelerated lubricant breakdown
Recommendations:
  • Check torque when components are at normal operating temperature
  • Use temperature-resistant thread lockers
  • Consider re-torquing after heat cycles

Humidity and Corrosion

Covers: Rust Prevention, Salt Exposure, Moisture Control

Moisture and corrosion can affect fastener integrity and torque values

High Humidity

Effects:
  • Accelerated corrosion formation
  • Reduced friction coefficient
  • Potential thread seizing
Prevention:
  • Use corrosion-resistant fasteners
  • Apply appropriate anti-seize compounds
  • Maintain proper protective coatings

Salt Exposure

Effects:
  • Rapid corrosion development
  • Thread damage
  • Seized fasteners
Prevention:
  • Regular underbody washing
  • Use of sacrificial anodes where appropriate
  • Application of protective coatings

Seasonal Maintenance

Spring, Summer, Fall, and Winter maintenance schedules

Spring

  • Inspect for winter damage
  • Clean and protect exposed fasteners
  • Check torque on critical components

Summer

  • Monitor heat-affected components
  • Check expansion-related loosening
  • Inspect cooling system mounts

Fall

  • Prepare for winter conditions
  • Apply corrosion protection
  • Verify all fasteners are properly torqued

Winter

  • More frequent inspection of critical fasteners
  • Check for salt damage
  • Monitor suspension component torque

Related Resources

Tools, service procedures, and technical bulletins

Recommended Tools

Digital Torque Wrench (10-100 Nm)

Essential for tightening fasteners to precise torque specifications, preventing damage and ensuring proper assembly. This range IS suitable for many applications on the Sportage.

  • Digital display for accurate readings
  • Audible alarm when target torque IS reached
  • Multiple units (Nm, ft-lb, in-lb)
  • Reversible ratcheting mechanism
Learn more
Service Procedures

Engine Assembly Torque Specifications

Step-by-step instructions for tightening engine components to the correct torque values.

  • Locate the bolt or nut to be tightened.
  • Refer to the torque specifications for the specific component.
  • Set the torque wrench to the desired torque value.
  • Tighten the bolt or nut until the torque wrench clicks.
  • Double-check the torque value using a torque angle gauge.
View full procedure

Suspension and Steering Torque Specifications

Instructions for tightening suspension and steering components to the proper torque values.

  • Locate the bolt or nut to be tightened.
  • Refer to the torque specifications for the specific component.
  • Set the torque wrench to the desired torque value.
  • Tighten the bolt or nut until the torque wrench clicks.
  • Double-check the torque value using a torque angle gauge.
View full procedure

Body and Trim Torque Specifications

Instructions for tightening body and trim components to the proper torque values.

  • Locate the bolt or nut to be tightened.
  • Refer to the torque specifications for the specific component.
  • Set the torque wrench to the desired torque value.
  • Tighten the bolt or nut until the torque wrench clicks.
  • Double-check the torque value using a torque angle gauge.
View full procedure
Technical Service Bulletins

Technical Service Bulletin: Engine Oil Leak

2023-03-15

This bulletin addresses an issue with engine oil leaking from the oil pan gasket. The resolution includes replacing the oil pan gasket and tightening the bolts to the correct torque specifications.

2022-Present Sportage with 2.5L engine

Resolution: Replace the oil pan gasket and tighten the bolts to 12 Nm (9 ft-lb).

Technical Service Bulletin: Suspension Noise

2022-12-01

This bulletin addresses a concern with excessive noise coming from the suspension. The resolution includes inspecting the suspension components and tightening the bolts to the correct torque specifications.

2022-Present Sportage with AWD

Resolution: Inspect the suspension components and tighten the bolts to 100 Nm (74 ft-lb).

Legal Disclaimer

Important information about using this content

Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.

General Information
The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.
Warranty & Liability

The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.

We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.

Technical Information
  • All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
  • Vehicle specifications and procedures may vary by model year, trim level, and region.
  • Always follow the manufacturer's recommended procedures and safety precautions.
  • Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
  • If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.

About the Author

Expert automotive knowledge and experience

Alan Montanye - Automotive Technical Specialist
ASE

Alan Montanye

Automotive Technical Specialist

ASE Master Certified Technician with over a decade of hands-on experience in automotive repair and diagnostics.

Facebook Contact
15+ Years
Experience
500+ Guides
Guides
50+ Makes
Vehicles
1000+ Solutions
Solutions

Diagnostic

Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.

Repair

Expert in both traditional mechanical repairs and modern vehicle systems.

Additional Expertise

Documentation

Created over 500 detailed repair guides and technical documents.

Training

Conducted technical training sessions and contributed to repair databases.

Certifications & Research

Certifications

  • ASE Master Technician Certification
  • Advanced Diagnostic Specialist
  • Hybrid/Electric Vehicle Systems
  • Performance Tuning Expert

Research & Community

Actively researches emerging technologies and contributes to automotive forums.

© 2025 Kia Specs. All rights reserved.

Privacy Policy Terms of Service