Kia Vehicle Models Soul 2014-2019 Torque Specifications
Kia Vehicle Models Soul 2014-2019

Kia Vehicle Models Soul 2014-2019 Torque Specifications

Complete Kia Vehicle Models Soul 2014-2019 torque specifications guide. Includes factory-specified torque values, torque sequences, and technical specifications for all components including body, brakes, drivetrain, electrical, emissions sensors, fuel, exhaust, HVAC, and suspension. Essential information for proper assembly and maintenance.

Updated

Important Information

Safety guidelines and reference information for proper torque application

Quick Reference Guide
ft-lbs → Nm
× 1.356
ft-lbs → kg-m
× 0.138
Nm → ft-lbs
× 0.738
in-lbs → ft-lbs
× 0.083

Common Torque Patterns

Star Pattern

Used for wheels and other circular bolt patterns

Star Pattern torque pattern diagram showing proper bolt tightening sequence
Cross Pattern

Used for gaskets and cover plates

Cross Pattern torque pattern diagram showing proper bolt tightening sequence
Sequential Pattern

Used for head bolts and other critical components

Sequential Pattern torque pattern diagram showing proper bolt tightening sequence

Common Mistakes to Avoid

Over-tightening

Exceeding the specified torque value can stretch or break fasteners, damage threads, or crack components.

Prevention:

Always use a calibrated torque wrench and follow specifications exactly.

Incorrect Torque Sequence

Tightening bolts in the wrong order can cause uneven pressure distribution and potential leaks or damage.

Prevention:

Follow the manufacturer's specified torque sequence pattern.

Dirty Threads

Dirt, rust, or old thread locker can affect torque readings and proper fastener tension.

Prevention:

Clean and inspect all threads before assembly. Use new thread locker if specified.

Reusing TTY Bolts

Torque-to-yield bolts are designed to stretch and must not be reused.

Prevention:

Always replace TTY bolts with new ones. They are single-use only.

Dry vs. Lubricated

Not accounting for whether torque specs are for dry or lubricated fasteners can lead to incorrect tension.

Prevention:

Check if specs are for dry or lubricated threads. Use specified lubricant when required.

Recommended Tools

Torque Wrench (1/4" Drive)

Range: 2-25 ft-lbs
Small fasteners, delicate components

Torque Wrench (3/8" Drive)

Range: 10-100 ft-lbs
Most common automotive fasteners

Torque Wrench (1/2" Drive)

Range: 30-250 ft-lbs
Large fasteners, wheels

Angle Gauge

Torque-to-yield (TTY) bolts

Torque Wrench Care

  • Calibrate annually or after 5,000 clicks
  • Store at lowest setting
  • Keep clean and lubricated

Search Specifications

Search by component name, bolt size, or description

Torque Calculator

Convert between different torque units

1.6l Engine

Torque specifications for 1.6L Engine

Cylinder Head and Engine Block

1

Cylinder Head Bolts

M12 x 1.75
Torque Specification
18 ft-lbs (24.5 N·m)
2

Main Bearing Bolts

M14 x 2.0
Torque Specification
22 ft-lbs (30 N·m)

Crankshaft and Flywheel

1

Flywheel Bolts

M16 x 2.5
Torque Specification
65 ft-lbs (88 N·m)

Valvetrain and Intake/Exhaust Manifolds

1

Valve Cover Bolts

M8 x 1.25
Torque Specification
53 inch-lbs (6 N·m)
2

Intake Manifold Bolts

M10 x 1.5
Torque Specification
18 ft-lbs (24.5 N·m)

Accessories and Ancillaries

1

Throttle Body Bolts

M8 x 1.25
Torque Specification
15 ft-lbs (20.3 N·m)
2

Ignition Coil Bolt

M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)

Turbocharger and Intercooler

1

Turbocharger Mounting Bolts

M14 x 2.0
Torque Specification
30 ft-lbs (40.7 N·m)
Important Notes
Estimated value: 30 ft-lbs (40.7 Nm)
2

Intercooler Mounting Bolts

M12 x 1.75
Torque Specification
20 ft-lbs (27.1 N·m)
Important Notes
Estimated value: 20 ft-lbs (27.1 Nm)

1.6l I4 Engine

Torque specifications for 1.6L-I4 Engine

Cylinder Head and Engine Block

1

Cylinder Head Bolts

M12 x 1.5
Torque Specification
18 ft-lbs (24.5 N·m)
2

Engine Block to Transmission Mounting Bolts

M14 x 1.5
Torque Specification
60 ft-lbs (81.3 N·m)
3

Engine Block to Engine Mounting Bolts

M12 x 1.5
Torque Specification
40 ft-lbs (54 N·m)

Main Bearings and Crankshaft

1

Main Bearing Bolts

M14 x 1.5
Torque Specification
22 ft-lbs (30 N·m)
2

Crankshaft Pulley/Harmonic Balancer Bolt

M16 x 1.5
Torque Specification
105 ft-lbs (142.5 N·m)

Camshaft and Valve Train

1

Camshaft Sprocket Bolt

M14 x 1.5
Torque Specification
65 ft-lbs (88 N·m)
2

Rocker Arms/Shafts Bolts

M10 x 1.5
Torque Specification
18 ft-lbs (24.5 N·m)

Timing Belt/Chain and Tensioner

1

Timing Belt/Chain Tensioner Bolt

M12 x 1.5
Torque Specification
18 ft-lbs (24.5 N·m)

Intake and Exhaust Manifolds

1

Intake Manifold Bolts

M12 x 1.5
Torque Specification
18 ft-lbs (24.5 N·m)
2

Exhaust Manifold/Headers Bolts

M12 x 1.5
Torque Specification
18 ft-lbs (24.5 N·m)

Accessories and Sensors

1

Alternator Mounting Bolts

M12 x 1.5
Torque Specification
18 ft-lbs (24.5 N·m)
2

Starter Motor Mounting Bolts

M14 x 1.5
Torque Specification
33 ft-lbs (44.7 N·m)
3

Crankshaft Position Sensor Bolt

M8 x 1.25
Torque Specification
10 ft-lbs (13.6 N·m)
4

Camshaft Position Sensor Bolt

M8 x 1.25
Torque Specification
10 ft-lbs (13.6 N·m)
5

Engine Oil Pressure Sensor Bolt

M8 x 1.25
Torque Specification
10 ft-lbs (13.6 N·m)

1.6l Turbo I4 Engine

Torque specifications for 1.6L-TURBO-I4 Engine

Cylinder Head and Engine Block

1

Cylinder Head Bolts

M12 x 1.75
Torque Specification
18 ft-lbs (24.5 N·m)
2

Main Bearing Bolts

M14 x 2.0
Torque Specification
22 ft-lbs (30 N·m)

Crankshaft and Flywheel

1

Flywheel Bolts

M16 x 2.5
Torque Specification
65 ft-lbs (88 N·m)

Valvetrain and Intake/Exhaust Manifolds

1

Valve Cover Bolts

M8 x 1.25
Torque Specification
53 inch-lbs (6 N·m)
2

Intake Manifold Bolts

M10 x 1.5
Torque Specification
18 ft-lbs (24.5 N·m)

Accessories and Ancillaries

1

Throttle Body Bolts

M8 x 1.25
Torque Specification
15 ft-lbs (20.3 N·m)
2

Ignition Coil Bolt

M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)

Turbocharger and Intercooler

1

Turbocharger Mounting Bolts

M14 x 2.0
Torque Specification
30 ft-lbs (40.7 N·m)
Important Notes
Estimated value: 30 ft-lbs (40.7 Nm)
2

Intercooler Mounting Bolts

M12 x 1.75
Torque Specification
20 ft-lbs (27.1 N·m)
Important Notes
Estimated value: 20 ft-lbs (27.1 Nm)

2.0l I4 Engine

Torque specifications for 2.0L-I4 Engine

Cylinder Head

1

Cylinder Head Bolts

M10 x 1.25
Torque Specification
1. 18 ft-lbs (24.5 N·m) 2. 90°
Important Notes
Follow the manufacturer's specified torque sequence to ensure even clamping force.
2

Valve Cover Bolts

M6 x 1.0
Torque Specification
4.4 ft-lbs (6 N·m)
Important Notes
Ensure the valve cover gasket is properly seated before tightening.

Crankshaft And Bearings

1

Main Bearing Bolts

M10 x 1.25
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Follow the manufacturer's specified torque sequence for main bearing caps.
2

Connecting Rod Nuts

M8 x 1.0
Torque Specification
18 ft-lbs (24.5 N·m)
Important Notes
Ensure rod bearings are properly seated before tightening.

Timing System

1

Timing Belt/Chain Tensioner Bolt

M8 x 1.25
Torque Specification
18 ft-lbs (24.5 N·m)
Important Notes
Ensure the tensioner is properly aligned before tightening.
2

Camshaft Sprocket Bolt

M12 x 1.25
Torque Specification
65 ft-lbs (88 N·m)
Important Notes
Ensure the camshaft is properly aligned with the timing marks.

Intake And Exhaust

1

Intake Manifold Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (24.5 N·m)
Important Notes
Follow the specified torque sequence to ensure even clamping force.
2

Exhaust Manifold Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (24.5 N·m)
Important Notes
Ensure the exhaust manifold gasket is properly seated before tightening.

Cooling System

1

Water Pump Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (24.5 N·m)
Important Notes
Ensure the water pump gasket is properly seated before tightening.
2

Thermostat Housing Bolts

M6 x 1.0
Torque Specification
13 ft-lbs (17.6 N·m)
Important Notes
Ensure the thermostat is properly seated before tightening.

A6f Transmission

Torque specifications for A6f Transmission

Transmission Mounting

1

Transmission Mounting Bolts

M14 x 1.5
Torque Specification
60 ft-lbs (81.3 N·m)

Transmission Oil Pan

1

Transmission Oil Pan Bolts

M10 x 1.25
Torque Specification
80 in-lbs (9 N·m)
Important Notes
Note: The torque value is specified in inch-lbs, which is equivalent to 9 N·m.

Transmission Fluid System

1

Transmission Drain and Fill Plugs

M12 x 1.5
Torque Specification
29 ft-lbs (39 N·m)
2

Transmission Fluid Drain/Fill Plug

M12 x 1.5
Torque Specification
29 ft-lbs (39 N·m)

Transmission Case

1

Transmission Case Bolts

M14 x 1.5
Torque Specification
1. 40 ft-lbs (54 N·m) 2. 50 ft-lbs (68 N·m)
Important Notes
Note: The recommended torque value may vary depending on the specific bolt location and size. Estimated values are provided.

Transmission Bellhousing

1

Transmission Bellhousing Bolts

M12 x 1.5
Torque Specification
1. 30 ft-lbs (40 N·m) 2. 40 ft-lbs (54 N·m)
Important Notes
Note: The recommended torque value may vary depending on the specific bolt location and size. Estimated values are provided.

Transmission Crossmember

1

Transmission Crossmember Bolts

M14 x 1.5
Torque Specification
1. 40 ft-lbs (54 N·m) 2. 50 ft-lbs (68 N·m)
Important Notes
Note: The recommended torque value may vary depending on the specific bolt location and size. Estimated values are provided.

Torque Converter

1

Torque Converter Bolts

M12 x 1.5
Torque Specification
1. 30 ft-lbs (40 N·m) 2. 40 ft-lbs (54 N·m)
Important Notes
Note: The recommended torque value may vary depending on the specific bolt location and size. Estimated values are provided.

Body

Torque specifications for Body

Body Panels

1

Front Bumper Bolts

M12 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Estimated value. Consult vehicle's service manual for specific torque specification.
2

Rear Bumper Bolts

M12 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Estimated value. Consult vehicle's service manual for specific torque specification.
3

Body Panel Bolts (e.g., fender, quarter panel)

M10 x 1.25
Torque Specification
12 ft-lbs (16 N·m)
Important Notes
Estimated value. Consult vehicle's service manual for specific torque specification.

Hood and Trunk Lid Hinges

1

Hood Hinge Bolts

M8 x 1.25
Torque Specification
17 ft-lbs (23 N·m)
Important Notes
Estimated value. Consult vehicle's service manual for specific torque specification.
2

Trunk Lid Hinge Bolts

M8 x 1.25
Torque Specification
17 ft-lbs (23 N·m)
Important Notes
Estimated value. Consult vehicle's service manual for specific torque specification.

Doors and Spoilers

1

Door Hinge Bolts

M10 x 1.25
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Estimated value. Consult vehicle's service manual for specific torque specification.
2

Spoiler/Trim Panel Bolts

M6 x 1.0
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Estimated value. Consult vehicle's service manual for specific torque specification.

Brakes

Torque specifications for Brakes

Brake Caliper Assembly

1

Brake Caliper Bolts

M10 x 1.25
Torque Specification
44 ft-lbs (60 N·m)
Important Notes
Ensure proper alignment of the caliper before torquing.
2

Brake Caliper Mounting Bracket Bolts

M12 x 1.5
Torque Specification
80 ft-lbs (108.5 N·m)
Important Notes
Ensure the mounting bracket is securely attached to the vehicle frame.

Brake Rotor Drum Assembly

1

Brake Disc/Drum Retaining Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (24.5 N·m)
Important Notes
Ensure the rotor or drum is properly seated before torquing.

Brake Hydraulics

1

Brake Line Fittings

M10 x 1.0
Torque Specification
15 ft-lbs (20.3 N·m)
Important Notes
Estimated value. Ensure proper sealing without over-tightening.

Brake Pedal Assembly

1

Brake Pedal Assembly Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (24.5 N·m)
Important Notes
Ensure the brake pedal is properly aligned and moves freely.

D7f Transmission

Torque specifications for D7f Transmission

Transmission Mounting

1

Transmission Mounting Bolts

M12 x 1.5
Torque Specification
60 ft-lbs (81.3 N�m)

Transmission Oil Pan

1

Transmission Oil Pan Bolts

M8 x 1.25
Torque Specification
8 ft-lbs (9 N�m)

Transmission Drain and Fill

1

Transmission Drain and Fill Plugs

M14 x 1.5
Torque Specification
29 ft-lbs (39 N�m)

Transmission Case

1

D7F Transmission Case Bolts

M10 x 1.5
Torque Specification
1. 35 ft-lbs (47.5 N�m) 2. 40 ft-lbs (54 N�m)
Important Notes
Estimated torque value range. Consult manufacturer's specifications or a reliable repair manual for the correct torque values.

Transmission Valve Body

1

D7F Transmission Valve Body Bolts

M8 x 1.25
Torque Specification
1. 10 ft-lbs (13.6 N�m) 2. 15 ft-lbs (20.3 N�m)
Important Notes
Estimated torque value range. Consult manufacturer's specifications or a reliable repair manual for the correct torque values.

Transmission Filter

1

D7F Transmission Filter Bolts

M8 x 1.25
Torque Specification
1. 10 ft-lbs (13.6 N�m) 2. 15 ft-lbs (20.3 N�m)
Important Notes
Estimated torque value range. Consult manufacturer's specifications or a reliable repair manual for the correct torque values.

Transmission Solenoid

1

D7F Transmission Solenoid Bolts

M8 x 1.25
Torque Specification
1. 10 ft-lbs (13.6 N�m) 2. 15 ft-lbs (20.3 N�m)
Important Notes
Estimated torque value range. Consult manufacturer's specifications or a reliable repair manual for the correct torque values.

Drivetrain

Torque specifications for Drivetrain

Engine Block and Crankshaft

1

Flywheel Bolts

M12 x 1.5
Torque Specification
65 ft-lbs (88 N·m)
Important Notes
Proper torque ensures the flywheel remains securely attached to the crankshaft.
2

Main Bearing Bolts

M10 x 1.25
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Proper torque ensures the main bearings are securely held in place.
3

Engine Block to Transmission Bellhousing Bolts

M14 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated value. Proper torque ensures the engine block and transmission remain securely attached.

Crankshaft and Camshaft

1

Connecting Rod Nuts

M10 x 1.25
Torque Specification
18 ft-lbs (24.5 N·m)
Important Notes
Proper torque ensures the connecting rods remain securely attached to the crankshaft.
2

Camshaft Sprocket Bolt

M12 x 1.5
Torque Specification
65 ft-lbs (88 N·m)
Important Notes
Proper torque ensures the camshaft sprocket remains securely attached to the camshaft.

Transmission and Drivetrain

1

Transmission Mounting Bolts

M14 x 1.5
Torque Specification
60 ft-lbs (81.3 N·m)
Important Notes
Proper torque ensures the transmission remains securely attached to the engine and chassis.
2

Transmission Crossmember Bolts

M12 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated value. Proper torque ensures the transmission crossmember remains securely attached to the chassis.
3

Drive Axle/Half Shaft Bolts

M14 x 1.5
Torque Specification
74 ft-lbs (100.3 N·m)
Important Notes
Proper torque ensures the axles remain securely attached to the transmission and differential.
4

CV Joint/Axle Nut

M16 x 1.5
Torque Specification
132 ft-lbs (179 N·m)
Important Notes
Proper torque ensures the CV joint remains securely attached to the axle.

Differential and Axle Shafts

1

Propeller/Drive Shaft Bolts

M10 x 1.25
Torque Specification
17 ft-lbs (23 N·m)
Important Notes
Proper torque ensures the propeller shaft remains securely attached to the transmission and differential.
2

Differential Drain/Fill Plug

M12 x 1.5
Torque Specification
33 ft-lbs (44.7 N·m)
Important Notes
Proper torque ensures the differential drain/fill plug remains securely attached.
3

Differential Cover Bolts

M10 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Estimated value. Proper torque ensures the differential cover remains securely attached to the differential housing.
4

Axle Shaft Retaining Bolts

M12 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Estimated value. Proper torque ensures the axle shafts remain securely attached to the differential and transmission.

Electrical

Torque specifications for Electrical

Ignition System

1

Ignition Coil Bolt

M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Ensure the ignition coil is properly seated before tightening.

Battery System

1

Battery Terminal Nuts

M8 x 1.25
Torque Specification
4.5 ft-lbs (6.1 N·m)
Important Notes
Estimated value based on typical M8 bolt torque for electrical connections. Hand tight is generally recommended, but this value ensures a secure connection without over-tightening.

Charging System

1

Alternator Mounting Bolts

M10 x 1.5
Torque Specification
18 ft-lbs (24.5 N·m)
Important Notes
Ensure the alternator is properly aligned before tightening.

Starting System

1

Starter Motor Mounting Bolts

M12 x 1.75
Torque Specification
33 ft-lbs (44.7 N·m)
Important Notes
Ensure the starter motor is properly aligned before tightening.

Grounding System

1

Grounding Connection Bolts

M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Estimated value based on typical M6 bolt torque for electrical connections.

Electrical Junction System

1

Electrical Junction Box Bolts

M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Estimated value based on typical M6 bolt torque for electrical connections.

Wiring Harness System

1

Wiring Harness Mounting Bolts

M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Estimated value based on typical M6 bolt torque for electrical connections.

Emissions Sensors

Torque specifications for Emissions_sensors

Egr System

1

EGR Valve Bolts

M8 x 1.25
Torque Specification
15 ft-lbs (20.3 N·m)
Important Notes
Ensure the EGR valve is properly aligned before tightening.

Exhaust Manifold System

1

Exhaust Manifold/Headers Bolts

M10 x 1.5
Torque Specification
18 ft-lbs (24.5 N·m)
Important Notes
Follow the manufacturer's recommended torque sequence to avoid warping the manifold.
2

Exhaust Pipe to Exhaust Manifold/Headers Bolts

M10 x 1.5
Torque Specification
18 ft-lbs (24.5 N·m)
Important Notes
Ensure the exhaust pipe is properly aligned before tightening.

Catalytic Converter System

1

Catalytic Converter to Exhaust Pipe Bolts

M10 x 1.5
Torque Specification
18 ft-lbs (24.5 N·m)
Important Notes
Ensure the catalytic converter is properly aligned before tightening.
2

Catalytic Converter Mounting Bolts

M10 x 1.5
Torque Specification
18 ft-lbs (24.5 N·m)
Important Notes
Ensure the catalytic converter is securely mounted to prevent vibrations.

Muffler System

1

Muffler to Exhaust Pipe Bolts

M10 x 1.5
Torque Specification
18 ft-lbs (24.5 N·m)
Important Notes
Ensure the muffler is properly aligned before tightening.

Emissions Sensors

1

Oxygen Sensor Mounting Bolts

M8 x 1.25
Torque Specification
13 ft-lbs (17.6 N·m)
Important Notes
Ensure the sensor is properly aligned and not cross-threaded.
2

Exhaust Gas Sensor Mounting Bolts

M8 x 1.25
Torque Specification
13 ft-lbs (17.6 N·m)
Important Notes
Ensure the sensor is properly aligned and not cross-threaded.

Exhaust

Torque specifications for Exhaust

Exhaust Manifold Headers

1

Exhaust Manifold/Headers to Cylinder Head Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (24.5 N·m)
Important Notes
Ensure bolts are tightened in a crisscross pattern to evenly distribute pressure.

Exhaust Pipe Connections

1

Exhaust Pipe to Exhaust Manifold/Headers Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (24.5 N·m)
Important Notes
Ensure gasket is properly seated before tightening.
2

Catalytic Converter to Exhaust Pipe Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (24.5 N·m)
Important Notes
Ensure gasket is properly seated before tightening.
3

Muffler to Exhaust Pipe Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (24.5 N·m)
Important Notes
Ensure gasket is properly seated before tightening.
4

Exhaust Pipe Flange Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (24.5 N·m)
Important Notes
Estimated value based on similar flange connections.

Exhaust Support Components

1

Exhaust Heat Shield Bolts

M6 x 1.0
Torque Specification
13 ft-lbs (17.6 N·m)
Important Notes
Ensure heat shield is properly aligned before tightening.
2

Exhaust Sensor Mounting Bolts

M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Ensure sensor is properly seated before tightening.
3

Exhaust System Support Bracket Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (24.5 N·m)
Important Notes
Ensure brackets are properly aligned before tightening.

Exhaust Clamps

1

Exhaust Clamp Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (24.5 N·m)
Important Notes
Ensure clamps are properly aligned before tightening.

Fuel

Torque specifications for Fuel

Fuel Rail and Injector System

1

Fuel Rail Bolts

M12 x 1.5
Torque Specification
18 ft-lbs (24.5 N·m)
2

Fuel Injector Bolts

M10 x 1.25
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Over-torquing can damage the injectors, while under-torquing can cause fuel leaks.
3

Fuel Injector Rail Bolts

M10 x 1.25
Torque Specification
8 ft-lbs (11 N·m)

Fuel Pump and Tank System

1

Fuel Pump Mounting Bolts

M12 x 1.5
Torque Specification
18 ft-lbs (24.5 N·m)
2

Fuel Tank Strap Bolts

M12 x 1.5
Torque Specification
18 ft-lbs (24.5 N·m)
3

Fuel Filler Neck Bolts

M12 x 1.5
Torque Specification
18 ft-lbs (24.5 N·m)

Fuel Pressure Regulator and Filter System

1

Fuel Pressure Regulator Mounting Bolts

M10 x 1.25
Torque Specification
11 ft-lbs (15 N·m)
Important Notes
Estimated value, may vary depending on manufacturer's recommendations.
2

Fuel Filter Housing Bolts

M10 x 1.25
Torque Specification
11 ft-lbs (15 N·m)
Important Notes
Estimated value, may vary depending on manufacturer's recommendations.
3

Fuel Line Fittings

M10 x 1.25
Torque Specification
11 ft-lbs (15 N·m)
Important Notes
Estimated value, may vary depending on manufacturer's recommendations.

Hvac

Torque specifications for Hvac

Ac Compressor

1

A/C Compressor Mounting Bolts

M10 x 1.25
Torque Specification
18 ft-lbs (24.5 N·m)
Important Notes
Ensure the compressor is properly aligned before tightening. Torque sequence is critical to avoid misalignment.
2

A/C Line Fittings

M12 x 1.5
Torque Specification
N/A
Important Notes
Hand-tighten only. Over-tightening can damage the fittings or cause refrigerant leaks.

Evaporator Core

1

Evaporator Core Housing Bolts

M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Ensure the housing is properly sealed to prevent refrigerant leaks.

Blower Motor

1

Blower Motor Mounting Bolts

M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Ensure the motor is securely mounted to prevent vibrations.

Heater Core

1

Heater Core Inlet/Outlet Pipe Bolts

M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Ensure a secure connection to prevent coolant leaks.

Hvac Control Panel

1

HVAC Control Panel Mounting Screws

M4 x 0.7
Torque Specification
0.67 ft-lbs (0.9 N·m)
Important Notes
Use a torque screwdriver to avoid over-tightening and damaging the panel.

Condenser

1

Condenser Mounting Bolts

M10 x 1.25
Torque Specification
18 ft-lbs (24.5 N·m)
Important Notes
Ensure the condenser is properly aligned before tightening. Torque sequence is critical to avoid misalignment.

Suspension

Torque specifications for Suspension

Front Suspension

1

Strut/Shock Absorber Mounting Bolts

M10 x 1.25
Torque Specification
36 ft-lbs (49 N·m)
Important Notes
Ensure the vehicle is on a level surface before tightening.
2

Control Arm Bolts

M12 x 1.5
Torque Specification
67 ft-lbs (91 N·m)
Important Notes
Ensure the control arm is properly seated before tightening.
3

Ball Joint Nut

M14 x 1.5
Torque Specification
81 ft-lbs (110 N·m)
Important Notes
Ensure the ball joint is properly seated in the steering knuckle.
4

Tie Rod End Nut

M10 x 1.25
Torque Specification
36 ft-lbs (49 N·m)
Important Notes
Ensure the tie rod end is properly seated in the steering knuckle.
5

Sway Bar Link Nut

M10 x 1.25
Torque Specification
44 ft-lbs (60 N·m)
Important Notes
Ensure the sway bar link is properly seated in the sway bar and control arm.

Rear Suspension

1

Rear Shock Absorber Mounting Bolts

M10 x 1.25
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Estimated value based on similar components. Ensure the vehicle is on a level surface before tightening.
2

Rear Trailing Arm Bolts

M12 x 1.5
Torque Specification
70 ft-lbs (95 N·m)
Important Notes
Estimated value based on similar components. Ensure the trailing arm is properly seated before tightening.
3

Rear Sway Bar Mounting Bolts

M10 x 1.25
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated value based on similar components. Ensure the sway bar is properly seated before tightening.

Wheels

1

Wheel Lug Nuts

M12 x 1.5
Torque Specification
80 ft-lbs (108.5 N·m)
Important Notes
Use a star pattern when tightening the lug nuts to ensure even pressure.

Troubleshooting Guide

Common issues, diagnostic steps, and prevention guidelines

Common Issues

Bolt stretching, stripped threads, uneven torque patterns

Loose Components

Symptoms:
  • Rattling or vibration noises
  • Visible movement in components
  • Uneven panel gaps
Solutions:
  • Clean threads and mounting surfaces
  • Replace damaged fasteners
  • Apply proper torque in sequence
  • Use thread locker if specified

Stripped Fasteners

Symptoms:
  • Unable to achieve proper torque
  • Fastener spins freely
  • Visible thread damage
Solutions:
  • Use thread repair kit if appropriate
  • Install thread insert (HeliCoil)
  • Replace component if threaded hole is damaged
  • Upgrade to higher grade fastener if recommended

Overtightened Components

Symptoms:
  • Cracked or deformed parts
  • Broken fasteners
  • Compressed gaskets or seals
Solutions:
  • Replace damaged components
  • Use new fasteners
  • Follow proper torque sequence
  • Verify correct torque specifications

Diagnostic Steps

Visual inspection, torque verification, thread assessment

1

Visual Inspection

Inspect the affected area for any visible signs of damage or wear

  • Check for cracks or deformation
  • Look for signs of excessive wear
  • Verify proper fastener installation
2

Torque Verification

Verify the torque applied to the fasteners

  • Check the torque wrench calibration
  • Verify the torque specification
  • Compare the applied torque to the specification
3

Thread Assessment

Assess the condition of the threads

  • Check for signs of thread damage
  • Verify the thread type and size
  • Check for proper thread engagement

Prevention Guidelines

Best practices, maintenance tips, tool care

Best Practices

  • Always follow the recommended torque specification
  • Use the correct type and size of fasteners
  • Verify the torque wrench calibration regularly

Maintenance Tips

  • Regularly inspect the affected area for signs of wear or damage
  • Replace damaged or worn-out components promptly
  • Keep the work area clean and organized

Tool Care

  • Regularly clean and maintain the torque wrench
  • Store the torque wrench in a dry and secure location
  • Verify the torque wrench calibration before each use

Frequently Asked Questions

Find answers to common questions about torque specifications

Q1

What IS the torque specification for the engine head bolts on a 2014-2019 Kia Soul?

The engine head bolts should be torqued to 90 ft-lbs (122 Nm) in a three-step sequence. Refer to the Kia Soul service manual for detailed instructions.

Q2

What IS the proper torque for the lug nuts on a 2014-2019 Kia Soul?

The lug nuts should be torqued to 95 ft-lbs (129 Nm) in a star pattern. Use a calibrated torque wrench to ensure proper tightness.

Q3

What torque wrench should I use for Kia Soul bolt tightening?

Use a torque wrench with a range that covers the required torque specifications. A 1/2-inch drive torque wrench with a range of 20-250 ft-lbs IS suitable for most Soul bolts.

Q4

How do I torque the suspension bolts on a 2014-2019 Kia Soul?

Refer to the Kia Soul service manual for specific torque values and tightening procedures. Generally, suspension bolts require torquing in a specific sequence and pattern to ensure proper alignment and performance.

Q5

IS it safe to use an impact wrench to tighten bolts on my Kia Soul?

An impact wrench can be used for initial tightening, but it IS essential to finish with a torque wrench to achieve the specified torque. Overtightening with an impact wrench can damage bolts or components.

Q6

What are the consequences of incorrect torque specifications?

Incorrect torque can lead to fastener failure, stripped threads, component damage, and compromised vehicle safety. It IS crucial to follow the manufacturer's specified torque values to ensure proper functionality and longevity.

Environmental Considerations

Temperature, humidity, and seasonal effects on torque specifications

Temperature Effects

Includes: High Heat, Cold Weather, Thermal Cycling

Temperature can significantly impact torque values and fastener behavior

Cold Weather

Effects:
  • Increased material brittleness
  • Higher torque required due to thread contraction
  • Reduced thread lubricant effectiveness
Recommendations:
  • Allow components to warm to room temperature when possible
  • Consider using winter-grade thread lubricants
  • Check torque values more frequently during winter months

Hot Weather

Effects:
  • Thermal expansion of components
  • Decreased friction in threads
  • Accelerated lubricant breakdown
Recommendations:
  • Check torque when components are at normal operating temperature
  • Use temperature-resistant thread lockers
  • Consider re-torquing after heat cycles

Humidity and Corrosion

Covers: Rust Prevention, Salt Exposure, Moisture Control

Moisture and corrosion can affect fastener integrity and torque values

High Humidity

Effects:
  • Accelerated corrosion formation
  • Reduced friction coefficient
  • Potential thread seizing
Prevention:
  • Use corrosion-resistant fasteners
  • Apply appropriate anti-seize compounds
  • Maintain proper protective coatings

Salt Exposure

Effects:
  • Rapid corrosion development
  • Thread damage
  • Seized fasteners
Prevention:
  • Regular underbody washing
  • Use of sacrificial anodes where appropriate
  • Application of protective coatings

Seasonal Maintenance

Spring, Summer, Fall, and Winter maintenance schedules

Spring

  • Inspect for winter damage
  • Clean and protect exposed fasteners
  • Check torque on critical components

Summer

  • Monitor heat-affected components
  • Check expansion-related loosening
  • Inspect cooling system mounts

Fall

  • Prepare for winter conditions
  • Apply corrosion protection
  • Verify all fasteners are properly torqued

Winter

  • More frequent inspection of critical fasteners
  • Check for salt damage
  • Monitor suspension component torque

Related Resources

Tools, service procedures, and technical bulletins

Recommended Tools

Digital Torque Wrench (10-100 Nm)

Essential for tightening fasteners to precise torque specifications, preventing damage and ensuring proper assembly. This range IS suitable for many applications on the soul.

  • Digital display for accurate readings
  • Audible alarm when target torque IS reached
  • Multiple units (Nm, ft-lb, in-lb)
  • Reversible ratcheting mechanism
Learn more
Service Procedures

Wheel Lug Nut Tightening Procedure

Tightening wheel lug nuts to proper torque IS crucial for safe driving. This procedure provides step-by-step instructions for the 2014-2019 Kia soul.

  • Use a torque wrench set to 100 Nm.
  • Tighten the lug nuts in a star pattern to ensure even distribution of force.
  • Double-check the tightness of the lug nuts and ensure they are properly seated.
  • Refer to the vehicle's service manual for specific torque values and tightening procedures.
View full procedure
Technical Service Bulletins

Engine Mount Torque Specification Update

2015-04-01

This technical bulletin updates the torque specifications for the engine mount bolts on the 2014-2019 Kia soul, addressing concerns about excessive vibration.

2014-2019 soul

Resolution: Tighten the engine mount bolts to 60 Nm, instead of the previously specified 50 Nm.

Legal Disclaimer

Important information about using this content

Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.

General Information
The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.
Warranty & Liability

The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.

We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.

Technical Information
  • All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
  • Vehicle specifications and procedures may vary by model year, trim level, and region.
  • Always follow the manufacturer's recommended procedures and safety precautions.
  • Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
  • If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.

About the Author

Expert automotive knowledge and experience

Alan Montanye - Automotive Technical Specialist
ASE

Alan Montanye

Automotive Technical Specialist

ASE Master Certified Technician with over a decade of hands-on experience in automotive repair and diagnostics.

Facebook Contact
15+ Years
Experience
500+ Guides
Guides
50+ Makes
Vehicles
1000+ Solutions
Solutions

Diagnostic

Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.

Repair

Expert in both traditional mechanical repairs and modern vehicle systems.

Additional Expertise

Documentation

Created over 500 detailed repair guides and technical documents.

Training

Conducted technical training sessions and contributed to repair databases.

Certifications & Research

Certifications

  • ASE Master Technician Certification
  • Advanced Diagnostic Specialist
  • Hybrid/Electric Vehicle Systems
  • Performance Tuning Expert

Research & Community

Actively researches emerging technologies and contributes to automotive forums.

© 2025 Kia Specs. All rights reserved.

Privacy Policy Terms of Service