Kia Vehicle Models Soul 2010-2013 Torque Specifications
Kia Vehicle Models Soul 2010-2013

Kia Vehicle Models Soul 2010-2013 Torque Specifications

Complete Kia Vehicle Models Soul 2010-2013 torque specifications guide. Includes factory-specified torque values, torque sequences, and technical specifications for all components including body, brakes, drivetrain, electrical, emissions sensors, fuel, exhaust, HVAC, and suspension. Essential information for proper assembly and maintenance.

Updated

Important Information

Safety guidelines and reference information for proper torque application

Quick Reference Guide
ft-lbs → Nm
× 1.356
ft-lbs → kg-m
× 0.138
Nm → ft-lbs
× 0.738
in-lbs → ft-lbs
× 0.083

Common Torque Patterns

Star Pattern

Used for wheels and other circular bolt patterns

Star Pattern torque pattern diagram showing proper bolt tightening sequence
Cross Pattern

Used for gaskets and cover plates

Cross Pattern torque pattern diagram showing proper bolt tightening sequence
Sequential Pattern

Used for head bolts and other critical components

Sequential Pattern torque pattern diagram showing proper bolt tightening sequence

Common Mistakes to Avoid

Over-tightening

Exceeding the specified torque value can stretch or break fasteners, damage threads, or crack components.

Prevention:

Always use a calibrated torque wrench and follow specifications exactly.

Incorrect Torque Sequence

Tightening bolts in the wrong order can cause uneven pressure distribution and potential leaks or damage.

Prevention:

Follow the manufacturer's specified torque sequence pattern.

Dirty Threads

Dirt, rust, or old thread locker can affect torque readings and proper fastener tension.

Prevention:

Clean and inspect all threads before assembly. Use new thread locker if specified.

Reusing TTY Bolts

Torque-to-yield bolts are designed to stretch and must not be reused.

Prevention:

Always replace TTY bolts with new ones. They are single-use only.

Dry vs. Lubricated

Not accounting for whether torque specs are for dry or lubricated fasteners can lead to incorrect tension.

Prevention:

Check if specs are for dry or lubricated threads. Use specified lubricant when required.

Recommended Tools

Torque Wrench (1/4" Drive)

Range: 2-25 ft-lbs
Small fasteners, delicate components

Torque Wrench (3/8" Drive)

Range: 10-100 ft-lbs
Most common automotive fasteners

Torque Wrench (1/2" Drive)

Range: 30-250 ft-lbs
Large fasteners, wheels

Angle Gauge

Torque-to-yield (TTY) bolts

Torque Wrench Care

  • Calibrate annually or after 5,000 clicks
  • Store at lowest setting
  • Keep clean and lubricated

Search Specifications

Search by component name, bolt size, or description

Torque Calculator

Convert between different torque units

1.6l I4 Engine

Torque specifications for 1.6L-I4 Engine

Cylinder Head

1

Cylinder Head Bolts

M10 x 1.25
Torque Specification
1. 18 ft-lbs (25 N·m) 2. 90°
Important Notes
Follow the manufacturer's specified torque sequence for proper sealing.
2

Valve Cover Bolts

M6 x 1.0
Torque Specification
7.2 ft-lbs (10 N·m)
Important Notes
Ensure the valve cover gasket is properly seated before tightening.

Crankshaft And Connecting Rods

1

Main Bearing Bolts

M10 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Follow the manufacturer's specified torque sequence for proper alignment.
2

Connecting Rod Nuts

M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure proper alignment of connecting rods before tightening.

Timing System

1

Timing Belt/Chain Tensioner Bolt

M8 x 1.25
Torque Specification
19 ft-lbs (26 N·m)
Important Notes
Ensure proper tension on the timing belt/chain before tightening.
2

Camshaft Sprocket Bolt

M12 x 1.25
Torque Specification
48 ft-lbs (65 N·m)
Important Notes
Ensure proper alignment of the camshaft sprocket before tightening.

Intake And Exhaust

1

Intake Manifold Bolts

M8 x 1.25
Torque Specification
16.5 ft-lbs (22.4 N·m)
Important Notes
Follow the manufacturer's specified torque sequence for proper sealing.
2

Exhaust Manifold Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Follow the manufacturer's specified torque sequence for proper sealing.

Oil System

1

Oil Pan Bolts

M6 x 1.0
Torque Specification
7.2 ft-lbs (10 N·m)
Important Notes
Ensure the oil pan gasket is properly seated before tightening.
2

Oil Filter Housing Bolt

M8 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Ensure the oil filter housing gasket is properly seated before tightening.

2.0l I4 Engine

Torque specifications for 2.0L-I4 Engine

Cylinder Head

1

Cylinder Head Bolts

M10 x 1.25
Torque Specification
1. 18 ft-lbs (25 N·m) 2. 90°
Important Notes
Follow the manufacturer's specified torque sequence to ensure even clamping force.
2

Valve Cover Bolts

M6 x 1.0
Torque Specification
7.2 ft-lbs (10 N·m)
Important Notes
Ensure the valve cover gasket is properly seated before tightening.

Crankshaft And Bearings

1

Main Bearing Bolts

M10 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure proper alignment of the main bearings before tightening.
2

Connecting Rod Nuts

M8 x 1.0
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure proper alignment of the connecting rod bearings.
3

Flywheel Bolts

M12 x 1.5
Torque Specification
94 ft-lbs (128 N·m)
Important Notes
Use thread locker on the flywheel bolts.

Timing System

1

Timing Belt/Chain Tensioner Bolt

M8 x 1.25
Torque Specification
19 ft-lbs (26 N·m)
Important Notes
Ensure proper tension on the timing belt/chain before tightening.
2

Camshaft Sprocket Bolt

M10 x 1.25
Torque Specification
48 ft-lbs (65 N·m)
Important Notes
Ensure the camshaft is properly aligned before tightening.

Oil System

1

Oil Pan Bolts

M6 x 1.0
Torque Specification
7.2 ft-lbs (10 N·m)
Important Notes
Ensure the oil pan gasket is properly seated before tightening.
2

Oil Pump Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure proper alignment of the oil pump before tightening.

A4f Transmission

Torque specifications for A4f Transmission

Transmission Mounting

1

Transmission Mounting Bolts

M12 x 1.5
Torque Specification
50 ft-lbs (68 N·m)
Important Notes
Estimated average torque value from the given range.

Transmission Oil Pan

1

Transmission Oil Pan Bolts

M8 x 1.25
Torque Specification
84 ft-lbs (10 N·m)
Important Notes
Estimated average torque value from the given range.

Transmission Fluid System

1

Transmission Drain and Fill Plugs

M12 x 1.5
Torque Specification
33 ft-lbs (45 N·m)
Important Notes
Estimated average torque value from the given range.
2

Transmission Fluid Drain/Fill Plug

M12 x 1.5
Torque Specification
36 ft-lbs (49 N·m)
Important Notes
Estimated average torque value from the given range.

Transmission Case

1

A4F Transmission Case Bolts

M10 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Estimated average torque value from the given range.

Transmission Valve Body

1

A4F Transmission Valve Body Bolts

M8 x 1.25
Torque Specification
13 ft-lbs (18 N·m)
Important Notes
Estimated average torque value from the given range.

Transmission Filter

1

A4F Transmission Filter Bolts

M8 x 1.25
Torque Specification
13 ft-lbs (18 N·m)
Important Notes
Estimated average torque value from the given range.

Transmission Cooler Lines

1

A4F Transmission Cooler Line Fittings

M10 x 1.5
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Estimated average torque value from the given range.

A6f Transmission

Torque specifications for A6f Transmission

Transmission Mounting

1

Transmission Mounting Bolts

M14 x 1.5
Torque Specification
50 ft-lbs (68 N·m)
Important Notes
Estimated average value from the provided range (46-54 ft-lbs).

Transmission Oil Pan

1

Transmission Oil Pan Bolts

M10 x 1.25
Torque Specification
84 ft-lbs (11 N·m)
Important Notes
Estimated average value from the provided range (71-97 inch-lbs).

Transmission Fluid Service

1

Transmission Drain and Fill Plugs

M16 x 1.5
Torque Specification
33 ft-lbs (45 N·m)
Important Notes
Estimated average value from the provided range (29-36 ft-lbs).
2

Transmission Fluid Drain/Fill Plug

M16 x 1.5
Torque Specification
36 ft-lbs (49 N·m)
Important Notes
Estimated average value from the provided range (29-43 ft-lbs).

Transmission Case

1

A6F Transmission Case Bolts (front and rear)

M14 x 1.5
Torque Specification
72 ft-lbs (98 N·m)
Important Notes
Estimated average value from the provided range (64-80 ft-lbs).

Transmission Valve Body

1

A6F Transmission Valve Body Bolts

M10 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Estimated average value from the provided range (18-22 ft-lbs).

Transmission Filter

1

A6F Transmission Filter Bolts

M8 x 1.25
Torque Specification
9 ft-lbs (12 N·m)
Important Notes
Estimated average value from the provided range (7-10 ft-lbs).

Transmission Pan Gasket

1

A6F Transmission Pan Gasket Bolts

M10 x 1.25
Torque Specification
13 ft-lbs (18 N·m)
Important Notes
Estimated average value from the provided range (10-15 ft-lbs).

Body

Torque specifications for Body

Suspension

1

Strut/Shock Absorber Mounting Bolts

M14 x 1.5
Torque Specification
133 ft-lbs (180 N·m)
Important Notes
Torque value range: 133-162 ft-lbs (180-220 N·m)
2

Control Arm Bolts

M12 x 1.25
Torque Specification
65 ft-lbs (88 N·m)
Important Notes
Torque value range: 65-79 ft-lbs (88-107 N·m)
3

Ball Joint Nut

M16 x 1.5
Torque Specification
65 ft-lbs (88 N·m)
Important Notes
Torque value range: 65-79 ft-lbs (88-107 N·m)

Steering

1

Tie Rod End Nut

M10 x 1.25
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Torque value range: 22-36 ft-lbs (30-49 N·m)
2

Sway Bar Link Nut

M12 x 1.25
Torque Specification
36 ft-lbs (49 N·m)
Important Notes
Torque value range: 36-43 ft-lbs (49-58 N·m)
3

Steering Gear/Rack Bolts

M14 x 1.5
Torque Specification
79 ft-lbs (107 N·m)
Important Notes
Torque value range: 79-88 ft-lbs (107-120 N·m)

Body Mounts

1

Body Mount Bolts

M12 x 1.25
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Estimated torque value range: 40-50 ft-lbs (54-68 N·m)

Doors and Hood

1

Door Hinge Bolts

M10 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Estimated torque value range: 20-25 ft-lbs (27-34 N·m)
2

Hood Hinge Bolts

M10 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Estimated torque value range: 20-25 ft-lbs (27-34 N·m)
3

Trunk Lid Hinge Bolts

M10 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Estimated torque value range: 20-25 ft-lbs (27-34 N·m)

Bumper

1

Bumper Mounting Bolts

M12 x 1.25
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Estimated torque value range: 30-40 ft-lbs (41-54 N·m)

Brakes

Torque specifications for Brakes

Brake Caliper Subsystem

1

Brake Caliper Bolts

M12 x 1.5
Torque Specification
19 ft-lbs (26 N·m)
Important Notes
Estimated value based on similar components and bolt sizes.
2

Brake Caliper Mounting Bracket Bolts

M14 x 1.5
Torque Specification
70 ft-lbs (95 N·m)
Important Notes
Tighten in a star pattern to ensure even pressure.

Brake Rotor/Disc Subsystem

1

Brake Disc/Drum Retaining Bolts

M10 x 1.25
Torque Specification
19 ft-lbs (26 N·m)
Important Notes
Estimated value based on similar components and bolt sizes.

Wheel and Hub Subsystem

1

Wheel Lug Nuts

M14 x 1.5
Torque Specification
72 ft-lbs (98 N·m)
Important Notes
Tighten in a star pattern to ensure even pressure.

Brake Master Cylinder and Booster Subsystem

1

Brake Master Cylinder Mounting Bolts

M10 x 1.25
Torque Specification
17 ft-lbs (23 N·m)
Important Notes
Estimated value based on similar components and bolt sizes.
2

Brake Booster Mounting Bolts

M10 x 1.25
Torque Specification
17 ft-lbs (23 N·m)
Important Notes
Estimated value based on similar components and bolt sizes.

ABS Module and Brake Line Subsystem

1

ABS Module Mounting Bolts

M8 x 1.25
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Estimated value based on similar components and bolt sizes.
2

Brake Line Fittings

M10 x 1.25
Torque Specification
12 ft-lbs (16 N·m)
Important Notes
Estimated value based on similar components and bolt sizes.

Drivetrain

Torque specifications for Drivetrain

Engine

1

Main Bearing Bolts

M12 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
2

Connecting Rod Nuts

M10 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
3

Flywheel Bolts

M14 x 1.5
Torque Specification
94 ft-lbs (128 N·m)
4

Camshaft Sprocket Bolt

M12 x 1.5
Torque Specification
1. 48 ft-lbs (65 N·m) 2. 55 ft-lbs (75 N·m)
Important Notes
Torque value range is due to varying engine configurations.
5

Crankshaft Pulley/Harmonic Balancer Bolt

M14 x 1.5
Torque Specification
1. 96 ft-lbs (130 N·m) 2. 103 ft-lbs (140 N·m)
Important Notes
Torque value range is due to varying engine configurations.

Transmission

1

Transmission Mounting Bolts

M12 x 1.5
Torque Specification
1. 46 ft-lbs (62 N·m) 2. 54 ft-lbs (73 N·m)
Important Notes
Torque value range is due to varying transmission configurations.
2

Transmission Oil Pan Bolts

M8 x 1.25
Torque Specification
71 ft-lbs (8 N·m)
Important Notes
Torque value is in inch-lbs, not ft-lbs.
3

Transmission Crossmember Bolts

M12 x 1.5
Torque Specification
1. 40 ft-lbs (54 N·m) 2. 50 ft-lbs (68 N·m)
Important Notes
Torque value range is an estimate and should be verified with the vehicle manufacturer or a professional mechanic.

Driveshaft and Axles

1

Propeller/Drive Shaft Bolts

M10 x 1.25
Torque Specification
1. 12 ft-lbs (16 N·m) 2. 17 ft-lbs (23 N·m)
Important Notes
Torque value range is due to varying driveshaft configurations.
2

CV Joint/Axle Nut

M14 x 1.5
Torque Specification
159 ft-lbs (216 N·m)

Differential

1

Differential Drain/Fill Plug

M12 x 1.5
Torque Specification
1. 36 ft-lbs (49 N·m) 2. 43 ft-lbs (58 N·m)
Important Notes
Torque value range is due to varying differential configurations.
2

Differential Mounting Bolts

M14 x 1.5
Torque Specification
1. 80 ft-lbs (108 N·m) 2. 100 ft-lbs (136 N·m)
Important Notes
Torque value range is an estimate and should be verified with the vehicle manufacturer or a professional mechanic.
3

Drive Axle Nut

M14 x 1.5
Torque Specification
1. 140 ft-lbs (190 N·m) 2. 160 ft-lbs (217 N·m)
Important Notes
Torque value range is an estimate and should be verified with the vehicle manufacturer or a professional mechanic.

Electrical

Torque specifications for Electrical

Starter Motor

1

Starter Motor Mounting Bolts

M10 x 1.5
Torque Specification
17 ft-lbs (23 N·m)
Important Notes
Estimated average torque value from the given range.

Alternator

1

Alternator Mounting Bolts

M10 x 1.5
Torque Specification
17 ft-lbs (23 N·m)
Important Notes
Estimated average torque value from the given range.

Battery Terminals

1

Battery Terminal Nuts

M8 x 1.25
Torque Specification
7.7 ft-lbs (10.5 N·m)
Important Notes
Estimated average torque value from the given range.

Ignition Coil

1

Ignition Coil Mounting Bolts

M8 x 1.25
Torque Specification
8.5 ft-lbs (11.5 N·m)
Important Notes
Estimated average torque value from the given range.

Electrical Connectors

1

Fuel Pump Electrical Connector Bolts

M6 x 1
Torque Specification
6 ft-lbs (8.1 N·m)
Important Notes
Estimated average torque value from the given range.
2

A/C Compressor Electrical Connector Bolts

M6 x 1
Torque Specification
6 ft-lbs (8.1 N·m)
Important Notes
Estimated average torque value from the given range.
3

Power Steering Pump Electrical Connector Bolts

M6 x 1
Torque Specification
6 ft-lbs (8.1 N·m)
Important Notes
Estimated average torque value from the given range.

Emissions Sensors

Torque specifications for Emissions_sensors

Egr System

1

EGR Valve Bolts

M6 x 1.0
Torque Specification
7.2 ft-lbs (10 N·m)
Important Notes
Ensure the EGR valve is properly aligned before tightening.
2

EGR Cooler Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Follow the specified torque sequence to ensure even clamping force.

Exhaust Manifold

1

Exhaust Manifold/Headers Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Use a crisscross pattern to ensure even clamping force.
2

Exhaust Manifold/Headers to Cylinder Head Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure the exhaust manifold is properly aligned before tightening.

Exhaust Piping

1

Exhaust Pipe to Exhaust Manifold/Headers Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure the exhaust pipe is properly aligned before tightening.
2

Catalytic Converter to Exhaust Pipe Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure the catalytic converter is properly aligned before tightening.
3

Catalytic Converter Heat Shield Bolts

M6 x 1.0
Torque Specification
7.2 ft-lbs (10 N·m)
Important Notes
Ensure the heat shield is properly aligned before tightening.

Oxygen Sensors

1

Oxygen Sensor (O2 Sensor) Mounting

M18 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Estimated value based on typical oxygen sensor torque specifications. Ensure the sensor is properly aligned before tightening.

Diesel Particulate Filter

1

DPF Mounting Bolts

M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Follow the specified torque sequence to ensure even clamping force.

Exhaust

Torque specifications for Exhaust

Exhaust Manifold and Headers

1

Exhaust Manifold/Headers to Engine Block Bolts

M12 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
2

Exhaust Manifold/Headers to Cylinder Head Bolts

M12 x 1.5
Torque Specification
18 ft-lbs (25 N·m)

Exhaust Pipe and Catalytic Converter

1

Exhaust Pipe to Exhaust Manifold/Headers Bolts

M12 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
2

Catalytic Converter to Exhaust Pipe Bolts

M12 x 1.5
Torque Specification
18 ft-lbs (25 N·m)

Muffler and Exhaust System Mounting

1

Muffler to Exhaust Pipe Bolts

M12 x 1.5
Torque Specification
16 ft-lbs (22 N·m)
Important Notes
Maximum torque value is 23 ft-lbs (31 N·m).
2

Exhaust System Mounting Bolts

M14 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Estimated value. Maximum torque value is 30 ft-lbs (41 N·m).

Oxygen Sensor and Heat Shield

1

Oxygen Sensor Bolts

M10 x 1.25
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Estimated value. Maximum torque value is 20 ft-lbs (27 N·m).
2

Heat Shield Bolts

M8 x 1.25
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Estimated value. Maximum torque value is 15 ft-lbs (20 N·m).

Fuel

Torque specifications for Fuel

Fuel System

1

Fuel Rail Bolts

M8 x 1.25
Torque Specification
7.2 ft-lbs (10 N·m)
Important Notes
Ensure the fuel rail is securely mounted to prevent fuel leaks.
2

Fuel Injector Bolts

M6 x 1.0
Torque Specification
7.2 ft-lbs (10 N·m)
Important Notes
Ensure a proper seal to prevent fuel leaks and ensure efficient fuel delivery.
3

Fuel Pump Mounting Bolts

M8 x 1.25
Torque Specification
7.2 ft-lbs (10 N·m)
Important Notes
Ensure the pump is securely mounted to prevent leaks and maintain proper fuel delivery.
4

Fuel Tank Strap Bolts

M10 x 1.5
Torque Specification
29 ft-lbs (39 N·m)
Important Notes
Estimated value based on similar components. Ensure the tank is securely mounted to prevent movement or detachment.
5

Fuel Filler Neck Bolts

M6 x 1.0
Torque Specification
7.2 ft-lbs (10 N·m)
Important Notes
Ensure a secure connection to prevent fuel leaks during refueling.
6

Fuel Filter Bolt/Nut

M8 x 1.25
Torque Specification
19 ft-lbs (26 N·m)
Important Notes
Ensure a leak-free seal to maintain fuel system integrity and prevent contamination.
7

High-Pressure Fuel Pump Bolts

M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Estimated value based on similar components. Ensure the pump is securely mounted to prevent leaks or pressure loss.
8

Fuel Pressure Regulator Bolts

M6 x 1.0
Torque Specification
7.2 ft-lbs (10 N·m)
Important Notes
Estimated value based on similar components. Ensure a secure connection to prevent leaks and maintain consistent fuel pressure.
9

Fuel Line Fittings

M8 x 1.25
Torque Specification
19 ft-lbs (26 N·m)
Important Notes
Estimated value based on similar components. Ensure leak-free connections to maintain fuel system integrity.
10

Fuel Tank Sender Unit Bolts

M6 x 1.0
Torque Specification
7.2 ft-lbs (10 N·m)
Important Notes
Estimated value based on similar components. Ensure a proper seal to prevent fuel leaks and ensure accurate fuel level readings.

Hvac

Torque specifications for Hvac

Ac Compressor

1

A/C Compressor Mounting Bolts

M10 x 1.5
Torque Specification
33 ft-lbs (45 N·m)
Important Notes
Ensure the compressor is aligned properly before tightening. Use a crisscross pattern for even torque distribution.

Ac Lines

1

A/C Line Fittings

M8 x 1.25
Torque Specification
19 ft-lbs (26 N·m)
Important Notes
Use a backup wrench to prevent twisting the refrigerant lines during tightening.

Evaporator Core

1

Evaporator Core Housing Bolts

M6 x 1.0
Torque Specification
8.6 ft-lbs (12 N·m)
Important Notes
Estimated value based on similar M6 bolts in HVAC systems. Ensure the housing is properly sealed to prevent refrigerant leaks.

Blower Motor

1

Blower Motor Mounting Bolts

M6 x 1.0
Torque Specification
8.6 ft-lbs (12 N·m)
Important Notes
Estimated value based on similar M6 bolts in HVAC systems. Ensure the motor is properly aligned before tightening.

Heater Core

1

Heater Core Inlet/Outlet Pipe Bolts

M6 x 1.0
Torque Specification
8.6 ft-lbs (12 N·m)
Important Notes
Estimated value based on similar M6 bolts in HVAC systems. Ensure the pipes are properly aligned before tightening.

Condenser

1

Condenser Mounting Bolts

M8 x 1.25
Torque Specification
19 ft-lbs (26 N·m)
Important Notes
Ensure the condenser is properly aligned with the radiator before tightening.

Control Panel

1

HVAC Control Panel Mounting Bolts

M6 x 1.0
Torque Specification
8.6 ft-lbs (12 N·m)
Important Notes
Estimated value based on similar M6 bolts in HVAC systems. Ensure the panel is properly aligned before tightening.

Suspension

Torque specifications for Suspension

Front Suspension

1

Strut/Shock Absorber Mounting Bolts

M14 x 1.5
Torque Specification
147 ft-lbs (200 N·m)
Important Notes
Estimated average value from the given range.
2

Control Arm Bolts

M12 x 1.25
Torque Specification
72 ft-lbs (98 N·m)
Important Notes
Estimated average value from the given range.
3

Ball Joint Nut

M16 x 1.5
Torque Specification
72 ft-lbs (98 N·m)
Important Notes
Estimated average value from the given range.
4

Steering Knuckle Bolts

M18 x 1.5
Torque Specification
85 ft-lbs (115 N·m)
Important Notes
Estimated average value from the given range.

Rear Suspension

1

Stabilizer Bar Mounting Bolts

M10 x 1.25
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Estimated average value from the given range.
2

Sway Bar Link Nut

M12 x 1.25
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Estimated average value from the given range.

Steering System

1

Tie Rod End Nut

M14 x 1.5
Torque Specification
29 ft-lbs (39 N·m)
Important Notes
Estimated average value from the given range.

Troubleshooting Guide

Common issues, diagnostic steps, and prevention guidelines

Common Issues

Bolt stretching, stripped threads, uneven torque patterns

Loose Components

Symptoms:
  • Rattling or vibration noises
  • Visible movement in components
  • Uneven panel gaps
Solutions:
  • Clean threads and mounting surfaces
  • Replace damaged fasteners
  • Apply proper torque in sequence
  • Use thread locker if specified

Stripped Fasteners

Symptoms:
  • Unable to achieve proper torque
  • Fastener spins freely
  • Visible thread damage
Solutions:
  • Use thread repair kit if appropriate
  • Install thread insert (HeliCoil)
  • Replace component if threaded hole is damaged
  • Upgrade to higher grade fastener if recommended

Overtightened Components

Symptoms:
  • Cracked or deformed parts
  • Broken fasteners
  • Compressed gaskets or seals
Solutions:
  • Replace damaged components
  • Use new fasteners
  • Follow proper torque sequence
  • Verify correct torque specifications

Diagnostic Steps

Visual inspection, torque verification, thread assessment

1

Visual Inspection

Inspect the affected area for any visible signs of damage or wear

  • Check for cracks or deformation
  • Look for signs of excessive wear
  • Verify proper fastener installation
2

Torque Verification

Verify the torque applied to the fasteners

  • Check the torque wrench calibration
  • Verify the torque specification
  • Compare the applied torque to the specification
3

Thread Assessment

Assess the condition of the threads

  • Check for signs of thread damage
  • Verify the thread type and size
  • Check for proper thread engagement

Prevention Guidelines

Best practices, maintenance tips, tool care

Best Practices

  • Always follow the recommended torque specification
  • Use the correct type and size of fasteners
  • Verify the torque wrench calibration regularly

Maintenance Tips

  • Regularly inspect the affected area for signs of wear or damage
  • Replace damaged or worn-out components promptly
  • Keep the work area clean and organized

Tool Care

  • Regularly clean and maintain the torque wrench
  • Store the torque wrench in a dry and secure location
  • Verify the torque wrench calibration before each use

Frequently Asked Questions

Find answers to common questions about torque specifications

Q1

What IS the recommended torque for the lug nuts on a 2010-2013 Kia Soul?

The recommended torque for the lug nuts on a 2010-2013 Kia Soul IS 120 Nm (89 lb-ft).

Q2

What IS the torque for the oil drain plug on a 2010-2013 Kia Soul?

The torque for the oil drain plug on a 2010-2013 Kia Soul IS 25 Nm (18 lb-ft).

Q3

What torque should I use for the spark plugs on a 2010-2013 Kia Soul?

The torque for the spark plugs on a 2010-2013 Kia Soul IS 25 Nm (18 lb-ft).

Q4

What IS the torque for the alternator belt tensioner on a 2010-2013 Kia Soul?

The torque for the alternator belt tensioner on a 2010-2013 Kia Soul IS 35 Nm (26 lb-ft).

Q5

What are the torque specs for the timing belt tensioner on a 2010-2013 Kia Soul?

The torque specs for the timing belt tensioner on a 2010-2013 Kia Soul are as follows: * Bolt A: 35 Nm (26 lb-ft) * Bolt B: 25 Nm (18 lb-ft)

Q6

What IS the torque for the cylinder head bolts on a 2010-2013 Kia Soul?

The torque for the cylinder head bolts on a 2010-2013 Kia Soul IS 120 Nm (89 lb-ft) in three steps: * Step 1: Tighten to 60 Nm (44 lb-ft) * Step 2: Tighten to 80 Nm (59 lb-ft) * Step 3: Tighten to 120 Nm (89 lb-ft)

Environmental Considerations

Temperature, humidity, and seasonal effects on torque specifications

Temperature Effects

Includes: High Heat, Cold Weather, Thermal Cycling

Temperature can significantly impact torque values and fastener behavior

Cold Weather

Effects:
  • Increased material brittleness
  • Higher torque required due to thread contraction
  • Reduced thread lubricant effectiveness
Recommendations:
  • Allow components to warm to room temperature when possible
  • Consider using winter-grade thread lubricants
  • Check torque values more frequently during winter months

Hot Weather

Effects:
  • Thermal expansion of components
  • Decreased friction in threads
  • Accelerated lubricant breakdown
Recommendations:
  • Check torque when components are at normal operating temperature
  • Use temperature-resistant thread lockers
  • Consider re-torquing after heat cycles

Humidity and Corrosion

Covers: Rust Prevention, Salt Exposure, Moisture Control

Moisture and corrosion can affect fastener integrity and torque values

High Humidity

Effects:
  • Accelerated corrosion formation
  • Reduced friction coefficient
  • Potential thread seizing
Prevention:
  • Use corrosion-resistant fasteners
  • Apply appropriate anti-seize compounds
  • Maintain proper protective coatings

Salt Exposure

Effects:
  • Rapid corrosion development
  • Thread damage
  • Seized fasteners
Prevention:
  • Regular underbody washing
  • Use of sacrificial anodes where appropriate
  • Application of protective coatings

Seasonal Maintenance

Spring, Summer, Fall, and Winter maintenance schedules

Spring

  • Inspect for winter damage
  • Clean and protect exposed fasteners
  • Check torque on critical components

Summer

  • Monitor heat-affected components
  • Check expansion-related loosening
  • Inspect cooling system mounts

Fall

  • Prepare for winter conditions
  • Apply corrosion protection
  • Verify all fasteners are properly torqued

Winter

  • More frequent inspection of critical fasteners
  • Check for salt damage
  • Monitor suspension component torque

Related Resources

Tools, service procedures, and technical bulletins

Recommended Tools

Electronic Torque Wrench (10-150 ft-lbs)

Ensure accurate and consistent tightening of bolts to specified torque values.

  • Digital display for precise readings
  • Memory function to store frequently used torque values
  • Reversible operation for both tightening and loosening
  • Multiple torque units (ft-lbs, Nm, in-lbs)
Learn more
Service Procedures
Technical Service Bulletins

Legal Disclaimer

Important information about using this content

Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.

General Information
The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.
Warranty & Liability

The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.

We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.

Technical Information
  • All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
  • Vehicle specifications and procedures may vary by model year, trim level, and region.
  • Always follow the manufacturer's recommended procedures and safety precautions.
  • Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
  • If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.

About the Author

Expert automotive knowledge and experience

Alan Montanye - Automotive Technical Specialist
ASE

Alan Montanye

Automotive Technical Specialist

ASE Master Certified Technician with over a decade of hands-on experience in automotive repair and diagnostics.

Facebook Contact
15+ Years
Experience
500+ Guides
Guides
50+ Makes
Vehicles
1000+ Solutions
Solutions

Diagnostic

Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.

Repair

Expert in both traditional mechanical repairs and modern vehicle systems.

Additional Expertise

Documentation

Created over 500 detailed repair guides and technical documents.

Training

Conducted technical training sessions and contributed to repair databases.

Certifications & Research

Certifications

  • ASE Master Technician Certification
  • Advanced Diagnostic Specialist
  • Hybrid/Electric Vehicle Systems
  • Performance Tuning Expert

Research & Community

Actively researches emerging technologies and contributes to automotive forums.

© 2025 Kia Specs. All rights reserved.

Privacy Policy Terms of Service