Kia Vehicle Models Sedona 2006-2014
Kia Vehicle Models Sedona 2006-2014 Torque Specifications
Complete Kia Vehicle Models Sedona 2006-2014 torque specifications guide. Includes factory-specified torque values, torque sequences, and technical specifications for all components including body, brakes, drivetrain, electrical, emissions sensors, fuel, exhaust, HVAC, and suspension. Essential information for proper assembly and maintenance.
Updated
Important Information
Safety guidelines and reference information for proper torque application
Safety First
- Always verify torque specifications with your vehicle's factory service manual
- Use properly calibrated torque wrenches
- Replace all torque-to-yield (TTY) bolts - they are single-use only
- When in doubt, consult a professional mechanic
Quick Reference Guide
Quick Reference Guide
ft-lbs → Nm
× 1.356
ft-lbs → kg-m
× 0.138
Nm → ft-lbs
× 0.738
in-lbs → ft-lbs
× 0.083
Common Torque Patterns
Star Pattern
Used for wheels and other circular bolt patterns
Cross Pattern
Used for gaskets and cover plates
Sequential Pattern
Used for head bolts and other critical components
Common Mistakes to Avoid
Common Mistakes to Avoid
Over-tightening
Exceeding the specified torque value can stretch or break fasteners, damage threads, or crack components.
Prevention:
Always use a calibrated torque wrench and follow specifications exactly.
Incorrect Torque Sequence
Tightening bolts in the wrong order can cause uneven pressure distribution and potential leaks or damage.
Prevention:
Follow the manufacturer's specified torque sequence pattern.
Dirty Threads
Dirt, rust, or old thread locker can affect torque readings and proper fastener tension.
Prevention:
Clean and inspect all threads before assembly. Use new thread locker if specified.
Reusing TTY Bolts
Torque-to-yield bolts are designed to stretch and must not be reused.
Prevention:
Always replace TTY bolts with new ones. They are single-use only.
Dry vs. Lubricated
Not accounting for whether torque specs are for dry or lubricated fasteners can lead to incorrect tension.
Prevention:
Check if specs are for dry or lubricated threads. Use specified lubricant when required.
Recommended Tools
Recommended Tools
Torque Wrench (1/4" Drive)
Range: 2-25 ft-lbs
Small fasteners, delicate components
Torque Wrench (3/8" Drive)
Range: 10-100 ft-lbs
Most common automotive fasteners
Torque Wrench (1/2" Drive)
Range: 30-250 ft-lbs
Large fasteners, wheels
Angle Gauge
Torque-to-yield (TTY) bolts
Torque Wrench Care
- Calibrate annually or after 5,000 clicks
- Store at lowest setting
- Keep clean and lubricated
Search Specifications
Search by component name, bolt size, or description
Type to search through torque specifications. Use arrow keys to navigate results. Press Enter to select a result.
Torque Calculator
Convert between different torque units
3.5l Engine
Torque specifications for 3.5L Engine
3.5l Engine
Torque specifications for 3.5L Engine
Cylinder Head
1 Cylinder Head Bolts
M12 x 1.5
1
Cylinder Head Bolts
M12 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
Engine Block
1 Main Bearing Bolts
M16 x 1.5
1
Main Bearing Bolts
M16 x 1.5
Torque Specification
64 ft-lbs (87 N·m)
2 Oil Pan Bolts
M10 x 1.5
2
Oil Pan Bolts
M10 x 1.5
Torque Specification
8 ft-lbs (11 N·m)
3 Thermostat Housing Bolts
M10 x 1.5
3
Thermostat Housing Bolts
M10 x 1.5
Torque Specification
14 ft-lbs (19 N·m)
4 Oil Filter Housing Bolt
M12 x 1.5
4
Oil Filter Housing Bolt
M12 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
5 Oil Drain Plug Bolt
M14 x 1.5
5
Oil Drain Plug Bolt
M14 x 1.5
Torque Specification
29 ft-lbs (39 N·m)
Cylinder Head Components
1 Valve Cover Bolts
M8 x 1.25
1
Valve Cover Bolts
M8 x 1.25
Torque Specification
4 ft-lbs (6 N·m)
2 Rocker Arms/Shafts Bolts
M10 x 1.5
2
Rocker Arms/Shafts Bolts
M10 x 1.5
Torque Specification
19 ft-lbs (26 N·m)
3 Spark Plugs
M14 x 1.25
3
Spark Plugs
M14 x 1.25
Torque Specification
15 ft-lbs (20 N·m)
Intake System
1 Intake Manifold Bolts
M12 x 1.5
1
Intake Manifold Bolts
M12 x 1.5
Torque Specification
18 ft-lbs (24 N·m)
2 Throttle Body Bolts
M10 x 1.5
2
Throttle Body Bolts
M10 x 1.5
Torque Specification
16 ft-lbs (22 N·m)
3 Fuel Rail Bolts
M10 x 1.5
3
Fuel Rail Bolts
M10 x 1.5
Torque Specification
16 ft-lbs (22 N·m)
4 Fuel Injector Bolts
M10 x 1.5
4
Fuel Injector Bolts
M10 x 1.5
Torque Specification
15 ft-lbs (20 N·m)
Exhaust System
1 Exhaust Manifold/Headers Bolts
M12 x 1.5
1
Exhaust Manifold/Headers Bolts
M12 x 1.5
Torque Specification
26 ft-lbs (35 N·m)
2 EGR Valve Bolts
M10 x 1.5
2
EGR Valve Bolts
M10 x 1.5
Torque Specification
16 ft-lbs (22 N·m)
Cooling System
1 Water Pump Bolts
M12 x 1.5
1
Water Pump Bolts
M12 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
2 Water Pump Pulley Bolts
M10 x 1.5
2
Water Pump Pulley Bolts
M10 x 1.5
Torque Specification
6 ft-lbs (8 N·m)
3 Coolant Temperature Sensor Bolt
M10 x 1.5
3
Coolant Temperature Sensor Bolt
M10 x 1.5
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Estimated value
Ignition System
1 Ignition Coil Bolt
M8 x 1.25
1
Ignition Coil Bolt
M8 x 1.25
Torque Specification
6 ft-lbs (8 N·m)
Engine Mounts
1 Engine Mounting Bolts
M14 x 1.5
1
Engine Mounting Bolts
M14 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated value
Pcv System
1 PCV Valve Bolt
M10 x 1.5
1
PCV Valve Bolt
M10 x 1.5
Torque Specification
12 ft-lbs (16 N·m)
Important Notes
Estimated value
Engine Block Heater
1 Engine Block Heater Bolt
M12 x 1.5
1
Engine Block Heater Bolt
M12 x 1.5
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Estimated value
Oil Pressure Sensor
1 Engine Oil Pressure Sensor Bolt
M10 x 1.5
1
Engine Oil Pressure Sensor Bolt
M10 x 1.5
Torque Specification
12 ft-lbs (16 N·m)
Important Notes
Estimated value
3.5l V6 Engine
Torque specifications for 3.5L-V6 Engine
3.5l V6 Engine
Torque specifications for 3.5L-V6 Engine
Cylinder Head
1 Cylinder Head Bolts
M12 x 1.5
1
Cylinder Head Bolts
M12 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
Engine Block
1 Main Bearing Bolts
M16 x 1.5
1
Main Bearing Bolts
M16 x 1.5
Torque Specification
64 ft-lbs (87 N·m)
2 Oil Pan Bolts
M10 x 1.5
2
Oil Pan Bolts
M10 x 1.5
Torque Specification
8 ft-lbs (11 N·m)
3 Thermostat Housing Bolts
M10 x 1.5
3
Thermostat Housing Bolts
M10 x 1.5
Torque Specification
14 ft-lbs (19 N·m)
4 Oil Filter Housing Bolt
M12 x 1.5
4
Oil Filter Housing Bolt
M12 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
5 Oil Drain Plug Bolt
M14 x 1.5
5
Oil Drain Plug Bolt
M14 x 1.5
Torque Specification
29 ft-lbs (39 N·m)
Cylinder Head Components
1 Valve Cover Bolts
M8 x 1.25
1
Valve Cover Bolts
M8 x 1.25
Torque Specification
4 ft-lbs (6 N·m)
2 Rocker Arms/Shafts Bolts
M10 x 1.5
2
Rocker Arms/Shafts Bolts
M10 x 1.5
Torque Specification
19 ft-lbs (26 N·m)
3 Spark Plugs
M14 x 1.25
3
Spark Plugs
M14 x 1.25
Torque Specification
15 ft-lbs (20 N·m)
Intake System
1 Intake Manifold Bolts
M12 x 1.5
1
Intake Manifold Bolts
M12 x 1.5
Torque Specification
18 ft-lbs (24 N·m)
2 Throttle Body Bolts
M10 x 1.5
2
Throttle Body Bolts
M10 x 1.5
Torque Specification
16 ft-lbs (22 N·m)
3 Fuel Rail Bolts
M10 x 1.5
3
Fuel Rail Bolts
M10 x 1.5
Torque Specification
16 ft-lbs (22 N·m)
4 Fuel Injector Bolts
M10 x 1.5
4
Fuel Injector Bolts
M10 x 1.5
Torque Specification
15 ft-lbs (20 N·m)
Exhaust System
1 Exhaust Manifold/Headers Bolts
M12 x 1.5
1
Exhaust Manifold/Headers Bolts
M12 x 1.5
Torque Specification
26 ft-lbs (35 N·m)
2 EGR Valve Bolts
M10 x 1.5
2
EGR Valve Bolts
M10 x 1.5
Torque Specification
16 ft-lbs (22 N·m)
Cooling System
1 Water Pump Bolts
M12 x 1.5
1
Water Pump Bolts
M12 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
2 Water Pump Pulley Bolts
M10 x 1.5
2
Water Pump Pulley Bolts
M10 x 1.5
Torque Specification
6 ft-lbs (8 N·m)
3 Coolant Temperature Sensor Bolt
M10 x 1.5
3
Coolant Temperature Sensor Bolt
M10 x 1.5
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Estimated value
Ignition System
1 Ignition Coil Bolt
M8 x 1.25
1
Ignition Coil Bolt
M8 x 1.25
Torque Specification
6 ft-lbs (8 N·m)
Engine Mounts
1 Engine Mounting Bolts
M14 x 1.5
1
Engine Mounting Bolts
M14 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated value
Pcv System
1 PCV Valve Bolt
M10 x 1.5
1
PCV Valve Bolt
M10 x 1.5
Torque Specification
12 ft-lbs (16 N·m)
Important Notes
Estimated value
Engine Block Heater
1 Engine Block Heater Bolt
M12 x 1.5
1
Engine Block Heater Bolt
M12 x 1.5
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Estimated value
Oil Pressure Sensor
1 Engine Oil Pressure Sensor Bolt
M10 x 1.5
1
Engine Oil Pressure Sensor Bolt
M10 x 1.5
Torque Specification
12 ft-lbs (16 N·m)
Important Notes
Estimated value
3.8l Engine
Torque specifications for 3.8L Engine
3.8l Engine
Torque specifications for 3.8L Engine
Cylinder Head and Engine Block
1 Cylinder Head Bolts
M12 x 1.5
1
Cylinder Head Bolts
M12 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
2 Cylinder Head Studs
M14 x 1.5
2
Cylinder Head Studs
M14 x 1.5
Torque Specification
30 ft-lbs (40 N·m)
Important Notes
Estimated value, may vary depending on engine design and manufacturer's recommendations.
Main Bearings and Crankshaft
1 Main Bearing Bolts
M16 x 1.5
1
Main Bearing Bolts
M16 x 1.5
Torque Specification
64 ft-lbs (87 N·m)
Connecting Rods and Pistons
1 Connecting Rod Nuts
M12 x 1.5
1
Connecting Rod Nuts
M12 x 1.5
Torque Specification
19 ft-lbs (26 N·m)
Flywheel and Transmission
1 Flywheel Bolts
M14 x 1.5
1
Flywheel Bolts
M14 x 1.5
Torque Specification
94 ft-lbs (128 N·m)
Oil Pan and Engine Block
1 Oil Pan Bolts
M10 x 1.5
1
Oil Pan Bolts
M10 x 1.5
Torque Specification
8 ft-lbs (11 N·m)
Valve Train and Cylinder Head
1 Valve Cover Bolts
M8 x 1.25
1
Valve Cover Bolts
M8 x 1.25
Torque Specification
4 ft-lbs (6 N·m)
2 Rocker Arms/Shafts Bolts
M12 x 1.5
2
Rocker Arms/Shafts Bolts
M12 x 1.5
Torque Specification
19 ft-lbs (26 N·m)
Timing System
1 Timing Belt/Chain Tensioner Bolt
M14 x 1.5
1
Timing Belt/Chain Tensioner Bolt
M14 x 1.5
Torque Specification
33 ft-lbs (45 N·m)
2 Camshaft Sprocket Bolt
M16 x 1.5
2
Camshaft Sprocket Bolt
M16 x 1.5
Torque Specification
65 ft-lbs (88 N·m)
Accessory Components
1 Water Pump Bolts
M12 x 1.5
1
Water Pump Bolts
M12 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
2 Water Pump Pulley Bolts
M8 x 1.25
2
Water Pump Pulley Bolts
M8 x 1.25
Torque Specification
6 ft-lbs (8 N·m)
3.8l V6 Engine
Torque specifications for 3.8L-V6 Engine
3.8l V6 Engine
Torque specifications for 3.8L-V6 Engine
Cylinder Head and Engine Block
1 Cylinder Head Bolts
M12 x 1.5
1
Cylinder Head Bolts
M12 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
2 Cylinder Head Studs
M14 x 1.5
2
Cylinder Head Studs
M14 x 1.5
Torque Specification
30 ft-lbs (40 N·m)
Important Notes
Estimated value, may vary depending on engine design and manufacturer's recommendations.
Main Bearings and Crankshaft
1 Main Bearing Bolts
M16 x 1.5
1
Main Bearing Bolts
M16 x 1.5
Torque Specification
64 ft-lbs (87 N·m)
Connecting Rods and Pistons
1 Connecting Rod Nuts
M12 x 1.5
1
Connecting Rod Nuts
M12 x 1.5
Torque Specification
19 ft-lbs (26 N·m)
Flywheel and Transmission
1 Flywheel Bolts
M14 x 1.5
1
Flywheel Bolts
M14 x 1.5
Torque Specification
94 ft-lbs (128 N·m)
Oil Pan and Engine Block
1 Oil Pan Bolts
M10 x 1.5
1
Oil Pan Bolts
M10 x 1.5
Torque Specification
8 ft-lbs (11 N·m)
Valve Train and Cylinder Head
1 Valve Cover Bolts
M8 x 1.25
1
Valve Cover Bolts
M8 x 1.25
Torque Specification
4 ft-lbs (6 N·m)
2 Rocker Arms/Shafts Bolts
M12 x 1.5
2
Rocker Arms/Shafts Bolts
M12 x 1.5
Torque Specification
19 ft-lbs (26 N·m)
Timing System
1 Timing Belt/Chain Tensioner Bolt
M14 x 1.5
1
Timing Belt/Chain Tensioner Bolt
M14 x 1.5
Torque Specification
33 ft-lbs (45 N·m)
2 Camshaft Sprocket Bolt
M16 x 1.5
2
Camshaft Sprocket Bolt
M16 x 1.5
Torque Specification
65 ft-lbs (88 N·m)
Accessory Components
1 Water Pump Bolts
M12 x 1.5
1
Water Pump Bolts
M12 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
2 Water Pump Pulley Bolts
M8 x 1.25
2
Water Pump Pulley Bolts
M8 x 1.25
Torque Specification
6 ft-lbs (8 N·m)
A6f Transmission
Torque specifications for A6f Transmission
A6f Transmission
Torque specifications for A6f Transmission
Transmission Mounting
1 Transmission Mounting Bolts
M14 x 1.5
1
Transmission Mounting Bolts
M14 x 1.5
Torque Specification
46 ft-lbs (62 N·m)
Important Notes
Proper torque ensures the transmission is securely attached to the engine block or transmission crossmember.
Transmission Oil Pan
1 Transmission Oil Pan Bolts
M10 x 1.25
1
Transmission Oil Pan Bolts
M10 x 1.25
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Proper torque ensures the oil pan is securely attached to the transmission case.
Transmission Fluid Drain and Fill
1 Transmission Drain and Fill Plugs
M12 x 1.5
1
Transmission Drain and Fill Plugs
M12 x 1.5
Torque Specification
33 ft-lbs (45 N·m)
Important Notes
Proper torque ensures a secure seal to prevent leaks.
2 Transmission Fluid Drain/Fill Plug
M12 x 1.5
2
Transmission Fluid Drain/Fill Plug
M12 x 1.5
Torque Specification
29 ft-lbs (39 N·m)
Important Notes
Proper torque ensures a secure seal to prevent leaks.
Transmission Pan Gasket
1 Transmission Pan Gasket Bolts
M10 x 1.25
1
Transmission Pan Gasket Bolts
M10 x 1.25
Torque Specification
11 ft-lbs (15 N·m)
Important Notes
Estimated torque value. Proper torque ensures the gasket is securely attached to the transmission case.
Transmission Filter
1 Transmission Filter Bolts
M8 x 1.25
1
Transmission Filter Bolts
M8 x 1.25
Torque Specification
11 ft-lbs (15 N·m)
Important Notes
Estimated torque value. Proper torque ensures the filter is securely attached to the transmission case.
Torque Converter
1 Torque Converter Bolts
M14 x 1.5
1
Torque Converter Bolts
M14 x 1.5
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Estimated torque value. Proper torque ensures the torque converter is securely attached to the transmission case.
Transmission Case
1 Transmission Case Bolts
M12 x 1.5
1
Transmission Case Bolts
M12 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated torque value. Proper torque ensures the transmission case is securely attached together.
Body
Torque specifications for Body
Body
Torque specifications for Body
Suspension and Steering
1 Strut/Shock Absorber Mounting Bolts
M14 x 1.5
1
Strut/Shock Absorber Mounting Bolts
M14 x 1.5
Torque Specification
41 ft-lbs (55 N·m)
2 Control Arm Bolts
M16 x 1.5
2
Control Arm Bolts
M16 x 1.5
Torque Specification
66 ft-lbs (90 N·m)
3 Steering Gear/Rack Bolts
M12 x 1.5
3
Steering Gear/Rack Bolts
M12 x 1.5
Torque Specification
58 ft-lbs (78 N·m)
Body and Frame
1 Body Mount Bolts (Front and Rear)
M14 x 1.5
1
Body Mount Bolts (Front and Rear)
M14 x 1.5
Torque Specification
1. 40 ft-lbs (54 N·m)
2. 50 ft-lbs (68 N·m)
Important Notes
Estimated torque values. Consult the vehicle's service manual or manufacturer's recommendations for the correct torque values.
Exterior Trim and Accessories
1 Hood Hinge Bolts
M10 x 1.5
1
Hood Hinge Bolts
M10 x 1.5
Torque Specification
1. 15 ft-lbs (20 N·m)
2. 20 ft-lbs (27 N·m)
Important Notes
Estimated torque values. Consult the vehicle's service manual or manufacturer's recommendations for the correct torque values.
2 Trunk Lid Hinge Bolts
M10 x 1.5
2
Trunk Lid Hinge Bolts
M10 x 1.5
Torque Specification
1. 15 ft-lbs (20 N·m)
2. 20 ft-lbs (27 N·m)
Important Notes
Estimated torque values. Consult the vehicle's service manual or manufacturer's recommendations for the correct torque values.
3 Door Hinge Bolts
M10 x 1.5
3
Door Hinge Bolts
M10 x 1.5
Torque Specification
1. 15 ft-lbs (20 N·m)
2. 20 ft-lbs (27 N·m)
Important Notes
Estimated torque values. Consult the vehicle's service manual or manufacturer's recommendations for the correct torque values.
4 Bumper Mounting Bolts
M12 x 1.5
4
Bumper Mounting Bolts
M12 x 1.5
Torque Specification
1. 20 ft-lbs (27 N·m)
2. 30 ft-lbs (41 N·m)
Important Notes
Estimated torque values. Consult the vehicle's service manual or manufacturer's recommendations for the correct torque values.
5 Fender Mounting Bolts
M10 x 1.5
5
Fender Mounting Bolts
M10 x 1.5
Torque Specification
1. 15 ft-lbs (20 N·m)
2. 25 ft-lbs (34 N·m)
Important Notes
Estimated torque values. Consult the vehicle's service manual or manufacturer's recommendations for the correct torque values.
Brakes
Torque specifications for Brakes
Brakes
Torque specifications for Brakes
Brake Caliper System
1 Brake Caliper Bolts
M10 x 1.5
1
Brake Caliper Bolts
M10 x 1.5
Torque Specification
17 ft-lbs (23 N·m)
Important Notes
These bolts secure the brake caliper to the mounting bracket. Proper torque ensures the caliper is securely attached, allowing it to function correctly and preventing brake drag or uneven wear.
2 Brake Caliper Mounting Bracket Bolts
M12 x 1.75
2
Brake Caliper Mounting Bracket Bolts
M12 x 1.75
Torque Specification
58 ft-lbs (78 N·m)
Important Notes
These bolts attach the caliper mounting bracket to the steering knuckle or axle. Correct torque ensures the bracket is firmly secured, maintaining proper alignment of the caliper and rotor.
Brake Rotor Drum System
1 Brake Disc/Drum Retaining Bolts
M8 x 1.25
1
Brake Disc/Drum Retaining Bolts
M8 x 1.25
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
These bolts hold the brake disc (rotor) or drum in place during service. Proper torque ensures the rotor or drum is securely fastened, preventing movement that could cause vibration or noise.
Brake Hydraulic System
1 Brake Hose Banjo Bolt
M8 x 1.25
1
Brake Hose Banjo Bolt
M8 x 1.25
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
The banjo bolt connects the brake hose to the caliper. Proper torque ensures a leak-free connection and maintains hydraulic pressure in the brake system.
2 Brake Master Cylinder Mounting Bolts
M6 x 1.0
2
Brake Master Cylinder Mounting Bolts
M6 x 1.0
Torque Specification
16 ft-lbs (22 N·m)
Important Notes
These bolts secure the master cylinder to the brake booster. Proper torque ensures the master cylinder is firmly attached, preventing leaks and maintaining brake system pressure.
3 Brake Booster Mounting Bolts
M6 x 1.0
3
Brake Booster Mounting Bolts
M6 x 1.0
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
These bolts secure the brake booster to the firewall. Proper torque ensures the booster is firmly attached, maintaining proper brake pedal feel and system performance.
Brake Pedal System
1 Brake Pedal Bracket Bolts
M6 x 1.0
1
Brake Pedal Bracket Bolts
M6 x 1.0
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
These bolts secure the brake pedal assembly to the firewall. Proper torque ensures the pedal operates smoothly and maintains proper brake system functionality.
Wheel System
1 Wheel Lug Nuts
M14 x 1.5
1
Wheel Lug Nuts
M14 x 1.5
Torque Specification
1. 85 ft-lbs (115 N·m)
Important Notes
While not directly part of the brake system, wheel lug nuts secure the wheel to the hub. Proper torque ensures the wheel is firmly attached, which is critical for brake rotor alignment and overall safety.
Drivetrain
Torque specifications for Drivetrain
Drivetrain
Torque specifications for Drivetrain
Engine
1 Flywheel Bolts
M14 x 1.5
1
Flywheel Bolts
M14 x 1.5
Torque Specification
94 ft-lbs (128 N·m)
Important Notes
Securely attaches the flywheel to the crankshaft.
2 Main Bearing Bolts
M12 x 1.25
2
Main Bearing Bolts
M12 x 1.25
Torque Specification
64 ft-lbs (87 N·m)
Important Notes
Secures the main bearings in place, supporting the crankshaft.
3 Connecting Rod Nuts
M10 x 1.0
3
Connecting Rod Nuts
M10 x 1.0
Torque Specification
19 ft-lbs (26 N·m)
Important Notes
Secures the connecting rods to the crankshaft.
Transmission
1 Transmission Mounting Bolts
M14 x 1.5
1
Transmission Mounting Bolts
M14 x 1.5
Torque Specification
46 ft-lbs (62 N·m)
Important Notes
Secures the transmission to the engine and chassis.
2 Transmission Oil Pan Bolts
M10 x 1.0
2
Transmission Oil Pan Bolts
M10 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Secures the oil pan to the transmission.
Drivetrain
1 Drive Axle/Half Shaft Bolts
M14 x 1.5
1
Drive Axle/Half Shaft Bolts
M14 x 1.5
Torque Specification
58 ft-lbs (78 N·m)
Important Notes
Secures the axles to the transmission and differential.
2 CV Joint/Axle Nut
M18 x 1.5
2
CV Joint/Axle Nut
M18 x 1.5
Torque Specification
155 ft-lbs (210 N·m)
Important Notes
Secures the CV joint to the axle.
Differential
1 Differential Drain/Fill Plug
M12 x 1.25
1
Differential Drain/Fill Plug
M12 x 1.25
Torque Specification
47 ft-lbs (64 N·m)
Important Notes
Secures the differential fluid.
2 Differential Cover Bolts
M10 x 1.0
2
Differential Cover Bolts
M10 x 1.0
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Secures the differential cover to the differential.
Engine Block to Transmission Bellhousing
1 Engine Block to Transmission Bellhousing Bolts
M14 x 1.5
1
Engine Block to Transmission Bellhousing Bolts
M14 x 1.5
Torque Specification
35 ft-lbs (48 N·m)
Important Notes
Secures the engine block to the transmission bellhousing.
Transmission Crossmember
1 Transmission Crossmember Bolts
M14 x 1.5
1
Transmission Crossmember Bolts
M14 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Secures the transmission crossmember to the chassis.
Axle Shaft Retaining Bolts
1 Axle Shaft Retaining Bolts
M14 x 1.5
1
Axle Shaft Retaining Bolts
M14 x 1.5
Torque Specification
50 ft-lbs (68 N·m)
Important Notes
Secures the axle shafts to the differential.
Electrical
Torque specifications for Electrical
Electrical
Torque specifications for Electrical
Alternator And Starter Motor
1 Alternator Mounting Bolts
M12 x 1.5
1
Alternator Mounting Bolts
M12 x 1.5
Torque Specification
29 ft-lbs (39 N·m)
2 Starter Motor Mounting Bolts
M12 x 1.5
2
Starter Motor Mounting Bolts
M12 x 1.5
Torque Specification
32 ft-lbs (43 N·m)
Battery And Electrical Connectors
1 Battery Terminal Nuts
M8 x 1.25
1
Battery Terminal Nuts
M8 x 1.25
Torque Specification
5 ft-lbs (7 N·m)
2 Ignition Coil Mounting Bolts
M10 x 1.5
2
Ignition Coil Mounting Bolts
M10 x 1.5
Torque Specification
1. 10 ft-lbs (14 N·m)
2. 12 ft-lbs (16 N·m)
Important Notes
Estimated torque values based on general industry guidelines.
3 Fuel Pump Electrical Connector Bolts
M8 x 1.25
3
Fuel Pump Electrical Connector Bolts
M8 x 1.25
Torque Specification
1. 8 ft-lbs (11 N·m)
2. 10 ft-lbs (14 N·m)
Important Notes
Estimated torque values based on general industry guidelines.
4 A/C Compressor Electrical Connector Bolts
M8 x 1.25
4
A/C Compressor Electrical Connector Bolts
M8 x 1.25
Torque Specification
1. 8 ft-lbs (11 N·m)
2. 10 ft-lbs (14 N·m)
Important Notes
Estimated torque values based on general industry guidelines.
Emissions Sensors
Torque specifications for Emissions_sensors
Emissions Sensors
Torque specifications for Emissions_sensors
Egr System
1 EGR Valve Bolts
M8 x 1.25
1
EGR Valve Bolts
M8 x 1.25
Torque Specification
16 ft-lbs (22 N·m)
Important Notes
Ensure the EGR valve is properly aligned before tightening.
Exhaust Manifold
1 Exhaust Manifold/Headers Bolts
M10 x 1.5
1
Exhaust Manifold/Headers Bolts
M10 x 1.5
Torque Specification
26 ft-lbs (35 N·m)
Important Notes
Follow the manufacturer's recommended torque sequence to avoid warping.
2 Exhaust Manifold/Headers to Cylinder Head Bolts
M8 x 1.25
2
Exhaust Manifold/Headers to Cylinder Head Bolts
M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure the manifold is properly aligned before tightening.
Exhaust Pipe
1 Exhaust Pipe to Exhaust Manifold/Headers Bolts
M10 x 1.5
1
Exhaust Pipe to Exhaust Manifold/Headers Bolts
M10 x 1.5
Torque Specification
26 ft-lbs (35 N·m)
Important Notes
Ensure the gasket is properly seated before tightening.
2 Catalytic Converter to Exhaust Pipe Bolts
M10 x 1.5
2
Catalytic Converter to Exhaust Pipe Bolts
M10 x 1.5
Torque Specification
26 ft-lbs (35 N·m)
Important Notes
Ensure the gasket is properly seated before tightening.
Sensors
1 Oxygen Sensor (O2 Sensor) Mounting
M12 x 1.25
1
Oxygen Sensor (O2 Sensor) Mounting
M12 x 1.25
Torque Specification
30 ft-lbs (40 N·m)
Important Notes
Ensure the sensor is properly aligned before tightening.
2 Mass Air Flow (MAF) Sensor Mounting Bolts
M6 x 1.0
2
Mass Air Flow (MAF) Sensor Mounting Bolts
M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Ensure the sensor is properly seated before tightening.
3 Evaporative Emissions (EVAP) Canister Purge Valve Bolts
M6 x 1.0
3
Evaporative Emissions (EVAP) Canister Purge Valve Bolts
M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Ensure the valve is properly seated before tightening.
4 Exhaust Gas Temperature (EGT) Sensor Mounting
M8 x 1.25
4
Exhaust Gas Temperature (EGT) Sensor Mounting
M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure the sensor is properly aligned before tightening.
Exhaust
Torque specifications for Exhaust
Exhaust
Torque specifications for Exhaust
Exhaust Manifold Headers
1 Exhaust Manifold/Headers to Engine Block Bolts
M10 x 1.25
1
Exhaust Manifold/Headers to Engine Block Bolts
M10 x 1.25
Torque Specification
26 ft-lbs (35 N·m)
Important Notes
Ensure proper torque sequence to prevent warping of the manifold or headers.
2 Exhaust Manifold/Headers to Cylinder Head Bolts
M8 x 1.25
2
Exhaust Manifold/Headers to Cylinder Head Bolts
M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure proper torque sequence to prevent leaks at the cylinder head interface.
Exhaust Pipe Connections
1 Exhaust Pipe to Exhaust Manifold/Headers Bolts
M10 x 1.25
1
Exhaust Pipe to Exhaust Manifold/Headers Bolts
M10 x 1.25
Torque Specification
26 ft-lbs (35 N·m)
Important Notes
Ensure proper alignment before tightening to prevent leaks.
2 Catalytic Converter to Exhaust Pipe Bolts
M10 x 1.25
2
Catalytic Converter to Exhaust Pipe Bolts
M10 x 1.25
Torque Specification
26 ft-lbs (35 N·m)
Important Notes
Ensure proper alignment before tightening to prevent leaks.
3 Muffler to Exhaust Pipe Bolts
M10 x 1.25
3
Muffler to Exhaust Pipe Bolts
M10 x 1.25
Torque Specification
26 ft-lbs (35 N·m)
Important Notes
Ensure proper alignment before tightening to prevent leaks.
Exhaust Support Components
1 Exhaust Heat Shield Bolts
M6 x 1.0
1
Exhaust Heat Shield Bolts
M6 x 1.0
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure proper alignment to avoid interference with other components.
2 Exhaust Hanger Bolts
M8 x 1.25
2
Exhaust Hanger Bolts
M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure proper alignment to prevent vibrations or misalignment.
3 Exhaust Flange Bolts at Intermediate Joints
M10 x 1.25
3
Exhaust Flange Bolts at Intermediate Joints
M10 x 1.25
Torque Specification
26 ft-lbs (35 N·m)
Important Notes
Ensure proper alignment before tightening to prevent leaks.
Fuel
Torque specifications for Fuel
Fuel
Torque specifications for Fuel
Fuel Delivery System
1 Fuel Rail Bolts
M8 x 1.25
1
Fuel Rail Bolts
M8 x 1.25
Torque Specification
16 ft-lbs (22 N·m)
Important Notes
Ensure proper alignment of the fuel rail before tightening.
2 Fuel Injector Bolts
M6 x 1.0
2
Fuel Injector Bolts
M6 x 1.0
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Ensure injectors are properly seated before tightening.
3 Fuel Injector Rail Bolts
M6 x 1.0
3
Fuel Injector Rail Bolts
M6 x 1.0
Torque Specification
11 ft-lbs (15 N·m)
Important Notes
Ensure the rail is properly aligned with the injectors.
4 Fuel Pump Mounting Bolts
M8 x 1.25
4
Fuel Pump Mounting Bolts
M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure the fuel pump is properly seated in the tank.
5 Fuel Tank Strap Bolts
M8 x 1.25
5
Fuel Tank Strap Bolts
M8 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure the fuel tank is properly aligned before tightening.
6 Fuel Filler Neck Bolts
M6 x 1.0
6
Fuel Filler Neck Bolts
M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Ensure the filler neck is properly aligned with the tank.
7 Fuel Filter Bolt/Nut
M10 x 1.5
7
Fuel Filter Bolt/Nut
M10 x 1.5
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Ensure the filter housing is properly seated before tightening.
Fuel Pressure Components
1 High-Pressure Fuel Line Fittings
M12 x 1.5
1
High-Pressure Fuel Line Fittings
M12 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Ensure fittings are properly aligned and seated before tightening.
2 Fuel Pressure Regulator Bolts
M6 x 1.0
2
Fuel Pressure Regulator Bolts
M6 x 1.0
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Ensure the regulator is properly seated before tightening.
Fuel Tank Components
1 Fuel Tank Sender Unit Bolts
M6 x 1.0
1
Fuel Tank Sender Unit Bolts
M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Ensure the sender unit is properly seated before tightening.
2 Fuel Line Clamp Bolts
M5 x 0.8
2
Fuel Line Clamp Bolts
M5 x 0.8
Torque Specification
6 ft-lbs (8 N·m)
Important Notes
Ensure the fuel lines are properly aligned before tightening.
Hvac
Torque specifications for Hvac
Hvac
Torque specifications for Hvac
Ac Compressor
1 A/C Compressor Mounting Bolts
M10 x 1.5
1
A/C Compressor Mounting Bolts
M10 x 1.5
Torque Specification
37 ft-lbs (50 N·m)
Important Notes
Ensure bolts are tightened in a crisscross pattern to evenly distribute load.
Ac Lines
1 A/C Line Fittings
M8 x 1.25
1
A/C Line Fittings
M8 x 1.25
Torque Specification
12 ft-lbs (16 N·m)
Important Notes
Use a backup wrench to prevent twisting of the refrigerant lines during tightening.
Evaporator Housing
1 Evaporator Housing Bolts
M6 x 1.0
1
Evaporator Housing Bolts
M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Estimated value based on similar M6 bolts in HVAC systems.
Blower Motor
1 Blower Motor Mounting Bolts
M6 x 1.0
1
Blower Motor Mounting Bolts
M6 x 1.0
Torque Specification
6 ft-lbs (8 N·m)
Important Notes
Estimated value based on similar M6 bolts in HVAC systems.
Heater Core
1 Heater Core Inlet/Outlet Fittings
M8 x 1.25
1
Heater Core Inlet/Outlet Fittings
M8 x 1.25
Torque Specification
12 ft-lbs (16 N·m)
Important Notes
Use a backup wrench to prevent twisting of the coolant lines during tightening.
Hvac Case
1 HVAC Case Assembly Bolts
M6 x 1.0
1
HVAC Case Assembly Bolts
M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Estimated value based on similar M6 bolts in HVAC systems.
Suspension
Torque specifications for Suspension
Suspension
Torque specifications for Suspension
Front Suspension
1 Strut/Shock Absorber Mounting Bolts
M14 x 1.5
1
Strut/Shock Absorber Mounting Bolts
M14 x 1.5
Torque Specification
41 ft-lbs (55 N·m)
Important Notes
Secure the strut or shock absorber to the vehicle's frame or suspension component.
2 Control Arm Bolts
M16 x 1.5
2
Control Arm Bolts
M16 x 1.5
Torque Specification
66 ft-lbs (90 N·m)
Important Notes
Connect the control arms to the frame or suspension components.
3 Ball Joint Nut
M18 x 1.5
3
Ball Joint Nut
M18 x 1.5
Torque Specification
60 ft-lbs (82 N·m)
Important Notes
Secure the ball joint to the control arm or steering knuckle.
4 Tie Rod End Nut
M12 x 1.25
4
Tie Rod End Nut
M12 x 1.25
Torque Specification
36 ft-lbs (49 N·m)
Important Notes
Secure the tie rod end to the steering knuckle or control arm.
5 Sway Bar Link Nut
M10 x 1.25
5
Sway Bar Link Nut
M10 x 1.25
Torque Specification
32 ft-lbs (44 N·m)
Important Notes
Secure the sway bar link to the sway bar or control arm.
Upper Control Arm Bushings
1 Upper Control Arm Bushing Bolts
M12 x 1.25
1
Upper Control Arm Bushing Bolts
M12 x 1.25
Torque Specification
1. 40 ft-lbs (54 N·m)
2. 50 ft-lbs (68 N·m)
Important Notes
Estimated torque range based on typical values for similar applications.
Lower Control Arm Bushings
1 Lower Control Arm Bushing Bolts
M14 x 1.5
1
Lower Control Arm Bushing Bolts
M14 x 1.5
Torque Specification
1. 50 ft-lbs (68 N·m)
2. 60 ft-lbs (82 N·m)
Important Notes
Estimated torque range based on typical values for similar applications.
Steering Knuckle
1 Steering Knuckle Bolts
M16 x 1.5
1
Steering Knuckle Bolts
M16 x 1.5
Torque Specification
1. 70 ft-lbs (95 N·m)
2. 80 ft-lbs (108 N·m)
Important Notes
Estimated torque range based on typical values for similar applications.
Coil Spring Mounting
1 Coil Spring Mounting Bolts
M12 x 1.25
1
Coil Spring Mounting Bolts
M12 x 1.25
Torque Specification
1. 30 ft-lbs (41 N·m)
2. 40 ft-lbs (54 N·m)
Important Notes
Estimated torque range based on typical values for similar applications.
Troubleshooting Guide
Common issues, diagnostic steps, and prevention guidelines
Common Issues
Bolt stretching, stripped threads, uneven torque patterns
Common Issues
Bolt stretching, stripped threads, uneven torque patterns
Loose Components
Symptoms:
- Rattling or vibration noises
- Visible movement in components
- Uneven panel gaps
Solutions:
- Clean threads and mounting surfaces
- Replace damaged fasteners
- Apply proper torque in sequence
- Use thread locker if specified
Stripped Fasteners
Symptoms:
- Unable to achieve proper torque
- Fastener spins freely
- Visible thread damage
Solutions:
- Use thread repair kit if appropriate
- Install thread insert (HeliCoil)
- Replace component if threaded hole is damaged
- Upgrade to higher grade fastener if recommended
Overtightened Components
Symptoms:
- Cracked or deformed parts
- Broken fasteners
- Compressed gaskets or seals
Solutions:
- Replace damaged components
- Use new fasteners
- Follow proper torque sequence
- Verify correct torque specifications
Diagnostic Steps
Visual inspection, torque verification, thread assessment
Diagnostic Steps
Visual inspection, torque verification, thread assessment
1
Visual Inspection
Inspect the affected area for any visible signs of damage or wear
- Check for cracks or deformation
- Look for signs of excessive wear
- Verify proper fastener installation
2
Torque Verification
Verify the torque applied to the fasteners
- Check the torque wrench calibration
- Verify the torque specification
- Compare the applied torque to the specification
3
Thread Assessment
Assess the condition of the threads
- Check for signs of thread damage
- Verify the thread type and size
- Check for proper thread engagement
Prevention Guidelines
Best practices, maintenance tips, tool care
Prevention Guidelines
Best practices, maintenance tips, tool care
Best Practices
- Always follow the recommended torque specification
- Use the correct type and size of fasteners
- Verify the torque wrench calibration regularly
Maintenance Tips
- Regularly inspect the affected area for signs of wear or damage
- Replace damaged or worn-out components promptly
- Keep the work area clean and organized
Tool Care
- Regularly clean and maintain the torque wrench
- Store the torque wrench in a dry and secure location
- Verify the torque wrench calibration before each use
Frequently Asked Questions
Find answers to common questions about torque specifications
Q1 What IS the proper torque for the lug nuts on my 2006-2014 Kia Sedona?
Q1
What IS the proper torque for the lug nuts on my 2006-2014 Kia Sedona?
Tighten the lug nuts to 95 ft-lb (129 Nm) following a star pattern.
Q2 What torque wrench should I use for tightening critical bolts on my Sedona?
Q2
What torque wrench should I use for tightening critical bolts on my Sedona?
Use a high-quality torque wrench that has been calibrated within the last year. Ensure the wrench has an accuracy of ±4% or better.
Q3 How can I prevent over-tightening bolts on my Kia Sedona?
Q3
How can I prevent over-tightening bolts on my Kia Sedona?
Follow the specified torque values carefully and use a torque wrench that IS properly calibrated. Avoid using impact wrenches for critical bolts.
Q4 What are the torque specifications for the cylinder head bolts on my 2010 Sedona?
Q4
What are the torque specifications for the cylinder head bolts on my 2010 Sedona?
Tighten the cylinder head bolts in three stages: 22 ft-lb (30 Nm), 53 ft-lb (72 Nm), and 69 ft-lb (94 Nm).
Q5 What IS the recommended torque for the intake manifold bolts on my 2014 Sedona?
Q5
What IS the recommended torque for the intake manifold bolts on my 2014 Sedona?
Tighten the intake manifold bolts to 18 ft-lb (24 Nm) following a crisscross pattern.
Environmental Considerations
Temperature, humidity, and seasonal effects on torque specifications
Temperature Effects
Includes: High Heat, Cold Weather, Thermal Cycling
Temperature Effects
Includes: High Heat, Cold Weather, Thermal Cycling
Temperature can significantly impact torque values and fastener behavior
Cold Weather
Effects:
- Increased material brittleness
- Higher torque required due to thread contraction
- Reduced thread lubricant effectiveness
Recommendations:
- Allow components to warm to room temperature when possible
- Consider using winter-grade thread lubricants
- Check torque values more frequently during winter months
Hot Weather
Effects:
- Thermal expansion of components
- Decreased friction in threads
- Accelerated lubricant breakdown
Recommendations:
- Check torque when components are at normal operating temperature
- Use temperature-resistant thread lockers
- Consider re-torquing after heat cycles
Humidity and Corrosion
Covers: Rust Prevention, Salt Exposure, Moisture Control
Humidity and Corrosion
Covers: Rust Prevention, Salt Exposure, Moisture Control
Moisture and corrosion can affect fastener integrity and torque values
High Humidity
Effects:
- Accelerated corrosion formation
- Reduced friction coefficient
- Potential thread seizing
Prevention:
- Use corrosion-resistant fasteners
- Apply appropriate anti-seize compounds
- Maintain proper protective coatings
Salt Exposure
Effects:
- Rapid corrosion development
- Thread damage
- Seized fasteners
Prevention:
- Regular underbody washing
- Use of sacrificial anodes where appropriate
- Application of protective coatings
Seasonal Maintenance
Spring, Summer, Fall, and Winter maintenance schedules
Seasonal Maintenance
Spring, Summer, Fall, and Winter maintenance schedules
Spring
- Inspect for winter damage
- Clean and protect exposed fasteners
- Check torque on critical components
Summer
- Monitor heat-affected components
- Check expansion-related loosening
- Inspect cooling system mounts
Fall
- Prepare for winter conditions
- Apply corrosion protection
- Verify all fasteners are properly torqued
Winter
- More frequent inspection of critical fasteners
- Check for salt damage
- Monitor suspension component torque
Related Resources
Tools, service procedures, and technical bulletins
Recommended Tools
Digital Torque Wrench (10-100 Nm)
Essential for tightening fasteners to precise torque specifications, preventing damage and ensuring proper assembly. This range IS suitable for many applications on the Sedona.
- Digital display for accurate readings
- Audible alarm when target torque IS reached
- Multiple units (Nm, ft-lb, in-lb)
- Reversible ratcheting mechanism
Service Procedures
Engine Bolt Torque Specifications
Technical procedure specific to Kia Sedona for engine component tightening torque specifications.
- Cylinder head bolts: 80-95 Nm (59-70 ft-lb)
- Intake manifold bolts: 30-40 Nm (22-29 ft-lb)
- Exhaust manifold bolts: 60-75 Nm (44-55 ft-lb)
- Oil pan bolts: 15-20 Nm (11-15 ft-lb)
- Timing belt tensioner bolts: 40-50 Nm (29-36 ft-lb)
Suspension Bolt Torque Specifications
Technical procedure specific to Kia Sedona for suspension component tightening torque specifications.
- Control arm bolts: 60-75 Nm (44-55 ft-lb)
- Ball joint nuts: 50-70 Nm (37-51 ft-lb)
- Stabilizer bar links: 40-50 Nm (29-36 ft-lb)
- Strut bolts: 60-80 Nm (44-59 ft-lb)
- Wheel lug nuts: 100-120 Nm (74-89 ft-lb)
Brake System Bolt Torque Specifications
Technical procedure specific to Kia Sedona for brake system component tightening torque specifications.
- Brake caliper bolts: 100-130 Nm (74-96 ft-lb)
- Brake rotor bolts: 60-80 Nm (44-59 ft-lb)
- Master cylinder bolts: 40-50 Nm (29-36 ft-lb)
- ABS module bolts: 80-100 Nm (59-74 ft-lb)
- Brake line fittings: 30-45 Nm (22-33 ft-lb)
Technical Service Bulletins
NTB18-045-006: Intake Manifold Bolt Torque Specification Error
2018-05-09This bulletin corrects the intake manifold bolt torque specification for 2006-2014 Sedona models.
2006-2014 Sedona
Resolution: Replace the intake manifold bolts and torque to the corrected specification of 30-40 Nm (22-29 ft-lb).
TSB14-09-004: Engine Oil Pan Bolt Torque Specification Error
2014-09-02This bulletin corrects the engine oil pan bolt torque specification for 2006-2010 Sedona models.
2006-2010 Sedona
Resolution: Replace the oil pan bolts and torque to the corrected specification of 15-20 Nm (11-15 ft-lb).
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
ASE
15+ Years
Experience
500+ Guides
Guides
50+ Makes
Vehicles
1000+ Solutions
Solutions
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.